Allis Chalmers Product List

This information is presented by Steiner Tractor Parts, Inc. We are pleased to offer the following product for Allis Chalmers. Printable Version Available Here Steiner Tractor Parts, Inc. is the premier supplier of restoration quality parts  for antique tractors.  Check out our company blog for more information on our company and to view pictures from our most recent tractor show.  You can also view the Allis Products on our website.  We strive to provide top quality parts and superb customer service.  Give us a chance to supply the restoration parts you need for your old iron, we’d be glad to help!

ABC042: 1 PIECE OIL FILL/ BREATHER CAP: Fits Allis Models-EARLY WD, WF, WC - ECONOMY STYLE --- IF ORIGINAL STYLE IS NEEDED PLEASE SEE JDS500 - 8N6766B

WHS026: 10 X 28 (6 DIMPLE, 2 BLOCKS) REAR RIM: Fits Allis Models-WC, EARLY WD - USA MADE --- LIKE ORIGINAL - AC: 209464 --- MH: 32609A, 32769A

ACS028: 11 X 28 REAR RIM (SPINOUT): Fits Allis Models-WD, WD45 - 4 RAILS --- HOLES FOR STOP ADJUSTMENT ARE DRILLED 90 DEGREE PERPENDICULAR TO SIDE OF RIM NOT 90 DEGREES TO RAIL --- USA MADE --- STOP HOLES ARE ANGLED - AC: 220011

ACS273: 12 VOLT CHROME DASH LIGHT W/ BULB: Fits Allis Models-D10, D12, D14, D15, D17, D19, D21, I70, I75, 180, 185, 190, 190XT, 200, 210, 220, I40, I400, I60, I600 - - AC:229203,: 230247 &: 234404

ACS026: 12 X 28 REAR RIM (SPINOUT): Fits Allis Models-WD, WD45 - 4 RAILS --- HOLES FOR STOP ADJUSTMENT ARE DRILLED 90 DEGREE PERPENDICULAR TO SIDE OF RIM NOT 90 DEGREES TO RAIL --- STOP HOLES ARE ANGLED - AC: 226270

JDS606: 12-VOLT COMPLETE HEADLIGHT ASSEMBLY: Fits Allis Models-AS A REAR LIGHT SERVICEABLE FOR: WC SN 74330 & UP, WF SN 1904 & UP, RC - 12-VOLT --- HAS CORRECT STUD LENGTH --- 4-3/4" DIAMETER CURVED LENS --- STUD LENGTH IS 1 3/16" --- CAN BE INSTALLED ON FRONT OR REAR. --- INTERCHANGEABLE WITH IHS352, IHS353B, IHS354, IHS436, IHS355, ABC320 & IHS475 --- BLACK, BULLET STYLE --- USA MADE - AC: 208233 & 237100 --- COCKSHUTT: TO7720,: TO19437, & TO19438.

IHS647: 12-VOLT SEALED-BEAM HEADLIGHT ASSEMBLY: Fits Allis Models-200, 6040, 6060, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080 --- WILL FIT THE FOLLOWING BUT NOT LIKE ORIGINAL: 170, 175, 180, 185, 190, 190XT - COMES W/ SEALED BEAM BULB #4411 & RUBBER TRIM RING --- FOR FLAT TOP FENDERS --- NOTE: POST IS OUT OF BACK W/ WIRES THRU POST - AC:267185

ABC138: 12-VOLT SOLENOID STARTER OR MANIFOLD HEATER SWITCH: Fits Allis Models-D10, D12, D14, D15 GAS, D15 DIESEL 12 VOLT, D17, D19 GAS (WITH STARTER #1107695), 170, 180 GAS, D21, I-40, I-400, I-60, I-600 - 3 POST --- SADDLE MOUNT - AC:237136 --- SUPERCEDES AC:233296 --- OLIVER: 101059AS --- DELCO: DR1467 --- MM:101059AS --- : 1114545

ABC501: 18 HOLE STEEL SEAT PAN: Fits Allis Models-IB, WC, WF, RC - FINISH PAINTED RED 1/2" SINGLE BOLT HOLE, 17 1/2" WIDE PAN, 13 1/2 " DEEP - AC U-145, 200145 IH MB488B, CASE 01983AB, MM JT560

ACS041: 1ST PINION SHAFT GEAR: Fits Allis Models-D10, D12, D14, D15 - 50 TEETH - 228296

ACS234: 2 PIECE ANCHOR KIT: Fits Allis Models-RC, WC, WF, WD, WD45 - KIT CONTAINS ONE EACH OF LH & RH SIDES - 227273 (LH) --- 227274 (RH)

ACS147: 2 PIECE SIDE PANEL SET: Fits Allis Models-LH: D10 UP TO SN 9001, D12 UP TO SN 9001. --- RH FITS: D10 SN 3501 - 9000, D12 SN 3001 - 9000 - GOES UNDER GAS TANK --- USA MADE - (LH) 231587 --- (RH) 236019

ABC065: 2-WIRE KEY SWITCH WITH 2 KEYS: Fits Allis Models-B, C, CA, WD, WD45, D14 - ON SOME APPLICATION MUST DRILL HOLE TO .800 --- 3/4" DIAMETER THREAD --- 4 TERMINALS - FORD: 8N3679C --- MH: 14491A & 764929M91 --- OLIVER: 1K7354B

ACS238: 3 PIECE WEIGHT BRACKET KIT: Fits Allis Models-D15, D17, D19 - USA MADE --- LH & RH FRONT SIDES - 239528 (LH) --- 23952 (RH) --- 236049 (FRONT)

FDS022: 3 POINT DRAWBAR: Fits Allis Models-D10, D12, D14, D15, I60, I600, I40, I400, 5015, 5020, 5030, 5045, 160, 6040 & OTHER MODELS USING CAT 1 THREE POINT HITCH - STANDARD, RED --- CATEGORY 1 --- 1" X 2-1/2" X 26" --- 7/8" PIN SIZE - AC: 234854 --- COCKSHUTT: T11424 --- MF: 677240 --- FORD: 251006F --- IH: 370799R2 --- MM: 10A12563 --- OLIVER: 1E792

ACS015: 3 POINT HITCH CONVERSION KIT: Fits Allis Models-B, C - USA MADE --- CATEGORY I --- COMPLETE W/ HYDRAULIC CYLINDER, SHORTENED ADJ TOP LINK & BRKT --- TRACTOR MUST HAVE HYDRAULICS TO USE THIS CONVERSION --- BOLTS ONTO DRAWBAR -

ACS139: 3 POSITION LIGHT SWITCH: Fits Allis Models-B, C, CA, G, WC, WD, WD45 (ALL WITH CUT OUT ON GENERATOR) - HI-LO-CHARGE --- HI CHARGE WITH LIGHTS --- .800 DIAMETER THREADED END - AC: 208197 --- COCKSHUTT: TO7524 --- JD: AB2687R, AF687R, AL2857T --- MH: 851674M1, 850449M1, 15199A, 837078M91, --- VTA463

MIS119: 3 PT LYNCH PIN: Fits Allis Models-ALLIS MODELS - 7/16" DIA PIN --- 1-3/4" USEABLE LENGTH --- 1-5/8" DIA RING -

ACS010: 3 X 15 FRONT WHEEL, 5 HOLE: Fits Allis Models-B, C, CA, D10, D12 - 2 3/4" PILOT, 2 5/8" BOLT CENTER TO CENTER - OLIVER: 450530A

IHS584: 3-1/2" SEAT PIVOT SUPPORT ROD: Fits Allis Models-WC - EXACT COPY OF ORIGINAL --- INCLUDES 2 FLAT WASHERS, 2 RUBBER BUSHINGS AND 2 #5 BOLTS --- USA MADE - IH: 355753R1

JDS631: 3-POSITION FUSED SWITCH: Fits Allis Models-ALLIS MODELS - 15 AMPS --- 4 TERMINAL --- INCLUDES BLACK PLASTIC KNOB --- ONLY FITS LISTED MODELS USING A VOLTAGE REGULATOR - CASE: VT2108 --- JD: AF687R, AB2687R

ACS046: 3RD & 4TH SHIFT FORK: Fits Allis Models-180, 185, 190, 190XT, 200 - - 261385

ACS009: 4.25 X 16 FRONT WHEEL, 5 HOLE: Fits Allis Models-WC, WD, WD45, D14, D15, EARLY D17 - 3 3/8" PILOT --- 3" BOLT CENTER TO CENTER --- USA MADE -

WHS022: 4.5" X 16" (6 LUG) FRONT WHEEL: Fits Allis Models-ALLIS MODELS - 6" CIRCLE WITH 4.62" PILOT 2500 LB CAPACITY FOR 5.50 x 6.00 x16" TIRES TO DETERMINE BACKSPACING, LAY THE WHEEL FLAT ON THE GROUND WITH THE BACK OF WHEEL FACING UP. NEXT, LAY A STRAIGHTEDGE ACROSS WHEEL AND MEASURE THE DISTANCE FROM THE BACK SIDE OF MOUNTING SURFACE TO THE STRAIGHTEDGE. BACKSPACING = 4" - FORD:8N1015D

IHS352: 4-3/4" CURVED LENS WITH "GUIDE" NAME: Fits Allis Models-B, IB, C, CA, D10, D12, D14, D15 UP TO SN 9001, WC, WD, WD45, WF, RC - HAS GUIDE NAME --- INTERCHANGEABLE WITH THE ORIGINAL - JD:A2731R --- IH:53521D & 350478R1

ABC011: 6 VOLT DISTRIBUTOR COIL: Fits Allis Models-ALLIS MODELS - METAL HOUSING & MOUNTING BRACKET INCLUDED - COCKSHUTT: T-17748 --- DELCO: 1115380 & 1115381 --- WHITE: 30-3014967 --- JD: AM373T

ABC015: 6 VOLT GENERATOR CUT OUT ASSEMBLY: Fits Allis Models-B, IB, C, CA, RC, WC, WF, WD, WD45 - 15 AMP --- FOR AUTOLITE DISTRIBUTOR --- MOUNTING TABS ARE PARALLEL WITH CUT OUT - AC: 1867781 --- AUTOLITE: C4012(9-1) --- AUTOLITE: 9-4 & 9-5 --- CASE: CB4014 --- JD: 1116809DR, R40061 --- MASSEY: 1500199M91

ABC418: 63 AMP ALTERNATOR W/ PULLEY: Fits Allis Models-ALLIS MODELS - 10 SQUARE INCH HOUSING SURFACE AREA --- 6 1/4" HOUSING DIAMETER, 2 1/2" PULLEY DIAMETER, 5/8" BELT WIDTH NEW, NOT REBUILT --- CONVERTS 6V TO 12V --- SIMPLE 1-WIRE ALTERNATOR HOOK UP: RUN A WIRE FROM ALTERNATOR THROUGH AMP GAUGE TO POSITIVE SIDE OF BATTERY --- MUST REV ENGINE TO 800 - 850 RPM IN ORDER FOR UNIT TO SELF-EXCITE -

IHS354: 6V LIGHT BULB: Fits Allis Models-B, IB, C, CA, D10, D12, D14, D15 UP TO SN 9001, WC, WD, WD45 - 6 VOLT --- INTERCHANGEABLE WITH ORIGINAL --- FITS AS A HEADLIGHT OR A REAR COMBO LIGHT BULB - IH:142309

JDS603: 6-VOLT COMPLETE HEADLIGHT ASSEMBLY: Fits Allis Models-AS A REAR LIGHT SERVICEABLE FOR: WC SN 74330 & UP, WF SN 1904 & UP, RC - HAS CORRECT STUD LENGTH OF 1-3/16" --- 4-1/2" DIAMETER CURVED LENS --- CAN BE INSTALLED ON FRONT OR REAR. --- BLACK, BULLET STYLE --- USA MADE - AC: 208233 & 237100 --- COCKSHUTT REPLACES TO-7720,: TO19437, & TO19438.

ABC152: 6-VOLT EXTERNAL VOLTAGE REGULATOR: Fits Allis Models-D10, D12, D14 - BASE FLAT MOUNT --- 4-TERMINAL - AC: 228365 --- JD: AM2702T, AM1863T, & REGULATOR 1118291, 1118308 & 1118780 --- MF: 180142M92 --- DELCO: 1119575 --- 1116807 &: 1116816 --- IH:354234R91, 121578C1

ABC153: 6-VOLT VOLTAGE REGULATOR: Fits Allis Models-B, IB, C, CA, WC, WF, WD, WD45 - SADDLE MOUNT, 4-TERMINAL --- PROVIDES 2 UNIT POSITIVE GROUND --- GENERATOR MOUNTED REGULATOR --- CAN REPLACE TRACTORS W/ CUT-OUTS BY USING STP #ABC188 VOLTAGE REGULATOR CONVERSION KIT - 10A20736 --- REPLACES DELCO CUT OUTS WHEN USING ABC188: 1116766 & 1116809 --- REPLACES REGULATOR: 1118265, 1118305, 1118786, 1118790

ACS061: AIR CLEANER CAP: Fits Allis Models-WC, WD, WF, WD45, D15 - INLET DIAMETER: 1 3/4" --- O.D. OF CAP = 4" --- OVERALL HEIGHT = 1 1/2" - AC:208222

ACS062: AIR CLEANER CAP: Fits Allis Models-G (THRU HOOD) B, IB, C, RC, EARLY CA - INLET DIAMETER: 1 1/4" --- O.D. OF CAP = 3 1/4" --- OVERALL HEIGHT= 1 1/4" - AC:208299

ACS065: AIR CLEANER CAP: Fits Allis Models-LATE CA, D10, D12, D14 - INLET DIAMETER: 1 5/8" --- O.D OF CAP = 4" --- OVERALL HEIGHT = 1 3/8" - AC:225860 & 242072

ACS226: AIR CLEANER CAP: Fits Allis Models-WD45 DIESEL, D17 GAS UP TO SN 42000, D17 DIESEL UP TO SN 38963 - INLET=2.275" I.D. --- O.D. OF CAP = 4.94" DIAMETER - 226926

FDS081: AIR CLEANER CLAMP: Fits Allis Models-EARLY D10 UP TO SN 3501, EARLY D12 UP TO SN 3001, D14 - ALL W/ DONALDSON AIR CLEANER - AC: 228480 --- FORD: 311508 --- IH: 66357DA --- JD: AH774R --- MH: 15790A --- MF: 15203A --- OLIVER: 1B6058A --- CASE: G45011 -- MM: 10P831

ACS047: AIR CLEANER OIL CUP: Fits Allis Models-B, IB, C, CA, RC - 4" I.D., 4 7/16" O.D. - 225818 SUPERCEDES 207811

FDS034: AIR CLEANER OIL CUP: Fits Allis Models-SERVICEABLE (LOOKS SLIGHTLY DIFFERENT, BUT WORKS GREAT) FOR THE FOLLOWING: EARLY D10 UP TO SN 3501, EARLY D12 UP TO SN 3001, D14 - 4-3/4" O.D. AT LIP 3" HEIGHT --- 4.450 I.D. --- FOR CLAMP HELD CUP --- MEASURE BEFORE ORDERING - AC: 228478 --- FORD: 311507 --- IH: 352597R91 --- JD: AR773R, AB1626R, AB3477R --- CASE: G46012 --- MH: 15791A --- 15793A, 180201A, 1751275M1 --- MM: 10P829 --- OLIVER: 1M6054

IHS181: AIR CLEANER OIL CUP CLAMP: Fits Allis Models-B, IB, C, CA, RC, G - 4-7/16" O.D. AT LIP; 4-1/16" I.D. - AC: 225817, IH:52872D

ACS117: AIR CLEANER PIPE: Fits Allis Models-G - MADE IN USA --- OILED FINISH - 800147

ACS194: AIR CLEANER PIPE: Fits Allis Models-UNSTYLED WC UP TO SN 74329, UNSTYLED WF UP TO SN 1903 - EXACT COPY OF ORIGINAL --- USA MADE - 202560

ACS284: AIR CLEANER PIPE GROMMET: Fits Allis Models-210, 220, 7000, 7020, 7030, 7040, 7045, 7050, 7060 - 4" ID PIPE, 5-1/16" OD - 267859 OR 70267859

VID13D: ALLIS-CHALMERS ENGINE REBUILD VIDEO (DVD): Fits Allis Models-WC, WD, WD45, WF, WI, WS - -

VID13: ALLIS-CHALMERS ENGINE REBUILD VIDEO (VHS): Fits Allis Models-WC, WD, WD45, WF, WI, WS - -

VID14D: ALLIS-CHALMERS TUNE-UP VIDEO (DVD): Fits Allis Models-WC, WD, WD45, WF, WI, WS - -

VID14: ALLIS-CHALMERS TUNE-UP VIDEO (VHS): Fits Allis Models-WC, WD, WD45, WF, WI, WS - -

ABC495: ALTERNATOR PULLEY ONLY: Fits Allis Models-ALLIS MODELS - -

ABC016: AMMETER (20-0-20): Fits Allis Models-B, IB, C, CA, G, RC, WC, WF, WD, WD45, WD45D - ABC GAUGES MAY NOT HAVE SAME APPEARANCE AS ORIGINAL --- CHROME BEZEL - 208302

ABC466: AMMETER (AMP) GAUGE, 60-0-60: Fits Allis Models-ALLIS MODELS - BLACK BEZEL --- FITS MOST TRACTORS EQUIPPED WITH ALTERNATOR --- FITS A 2" DIAMETER HOLE -

ACS258: AMP GAUGE: Fits Allis Models-D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 190XT111, 200, 210, 220, 220FWA --- WILL WORK AS SERVICEABLE REPLACEMENT FOR B, C, CA, A, RC, WC, WF, WD, WD45 & WD45D - CHROME BEZEL - 254407 228717 240987 208302

ACS239: ANCHOR ROD: Fits Allis Models-D15, CORRECT FOR D17, D19 - HOLDS UP TO 4 ACS180 FRONT WEIGHTS - 236047

ACS241: ANCHOR RODS: Fits Allis Models-RC, WC, WF, WD - HOLDS UP TO 3 STP#ACS180 FRONT WEIGHTS - 227275

ACS222: BACK REST CUSHION: Fits Allis Models-D10, D12, D14, D15, D17, D19, D21; WILL ALSO FIT 170, 175, 180, 185, 190, 190XT, 210 & 220 IF USING 2-PIECE SEAT WITHOUT ARM RESTS - RESTORATION QUALITY, CUSHION EMBOSSED, LIKE ORIGINAL -

ABC177: BASIC CARBURETOR REPAIR KIT (MARVEL SCHEBLER): Fits Allis Models-WC, WD, WF - MAKE SURE THAT YOUR CARBURETOR MANUFACTURER NUMBER IS IN THE LIST THIS FITS!!!!!KIT CONTAINS: THROTTLE SHAFT, FLOAT VALVE, FLOAT LEVER PIN, CHOKE & THROTTLE SHAFT SEALS, NEEDLE VALVE, ADJUSTMENT SCREW, GASKETS & INSTRUCTIONS. -

ABC216: BASIC CARBURETOR REPAIR KIT (MARVEL SCHEBLER): Fits Allis Models-WD45, D17 - MAKE SURE THAT YOUR CARBURETOR MANUFACTURER NUMBER IS IN THE LIST THIS FITS!!!!! KIT CONTAINS: THROTTLE SHAFT, FLOAT VALVE, FLOAT LEVER PIN, CHOKE & THROTTLE SHAFT SEALS, NEEDLE VALVE, ADJUSTMENT SCREW, GASKETS & INSTRUCTIONS. -

ABC473: BASIC CARBURETOR REPAIR KIT (MARVEL SCHEBLER): Fits Allis Models-B, IB, C, RC, CA - MAKE SURE THAT YOUR CARBURETOR MANUFACTURER NUMBER IS IN THE LIST THIS FITS!!!!! --- KIT CONTAINS: THROTTLE SHAFT, FLOAT VALVE, FLOAT LEVER PIN, CHOKE & THROTTLE SHAFT SEALS, NEEDLE VALVE, ADJUSTMENT SCREW, GASKETS & INSTRUCTIONS. -

ACS072: BATTERY BOX: Fits Allis Models-WC, RC - HANGS ON SIDE OF FRAME --- USA MADE - 224539

ACS063L: BATTERY BOX LID ONLY: Fits Allis Models-B, CA, G, WD, WD45 GAS, D10, D12 - USA MADE - AC:210907

ACS193: BATTERY BOX W/ LID: Fits Allis Models-WD45 DIESEL - USA MADE - 226951

ACS029: BATTERY BOX W/LID: Fits Allis Models-B, C, CA - USA MADE - 226026

ACS030: BATTERY BOX W/LID: Fits Allis Models-WD, WD45 GAS - DASH NOT INCLUDED, MUST USE OLD DASH --- USA MADE - 224540

ACS063: BATTERY BOX W/LID: Fits Allis Models-G - USA MADE - AC:800626

ABC401: BATTERY CABLE: Fits Allis Models-ALLIS MODELS - GROUND CABLE NON-INSULATED. --- 2 GAUGE, LENGTH = 6" --- HEAVY DUTY STRAIGHT TERMINALS --- WHILE WE DEAL WITH A SUPPLY ISSUE, THIS MAY BE A 2 GAUGE CABLE. -

ABC403: BATTERY CABLE: Fits Allis Models-ALLIS MODELS - GROUND CABLE, NON-INSULATED --- HEAVY DUTY STRAIGHT TERMINALS --- 2 GAUGE, LENGTH = 24" -

ABC405: BATTERY CABLE: Fits Allis Models-AC TRACTORS - 2 GAUGE, LENGTH =13" --- HEAVY DUTY, STRAIGHT TERMINALS --- GROUND CABLE, NON-INSULATED --- WHILE WE DEAL WITH A SUPPLY ISSUE, THIS MAY BE A 2 GAUGE CABLE. -

ABC407: BATTERY CABLE: Fits Allis Models-ALLIS MODELS - INSULATED --- 2 GAUGE, LENGTH = 10 1/2" --- HEAVY DUTY: STRAIGHT TERMINALS --- WHILE WE DEAL WITH A SUPPLY ISSUE, THIS MAY BE A 2 GAUGE CABLE. -

ABC411: BATTERY CABLE: Fits Allis Models-ALLIS MODELS - GROUND CABLE, NON-INSULATED --- HEAVY DUTY, STRAIGHT TERMINALS --- 2 GAUGE, LENGTH = 9" --- WHILE WE DEAL WITH A SUPPLY ISSUE, THIS MAY BE A 2 GAUGE CABLE. -

ABC413: BATTERY CABLE: Fits Allis Models-ALLIS MODELS - INSULATED --- HEAVY DUTY --- 2 GAUGE, LENGTH = 14 1/2" --- 90 DEGREE TERMINAL ENDS & 7/16" EYELET OPENING --- WHILE WE DEAL WITH A SUPPLY ISSUE, THIS MAY BE A 2 GAUGE CABLE. -

ABC415: BATTERY CABLE: Fits Allis Models-ALLIS MODELS - INSULATED --- 2 GAUGE, LENGTH=12" --- 3/8" EYELET OPENING. --- HEAVY DUTY, STRAIGHT TERMINALS --- WHILE WE DEAL WITH A SUPPLY ISSUE, THIS MAY BE A 2 GAUGE CABLE. -

ABC417: BATTERY CABLE: Fits Allis Models-ALLIS MODELS - INSULATED --- HEAVY DUTY, STRAIGHT TERMINALS --- 2 GAUGE, LENGTH = 21" --- WHILE WE DEAL WITH A SUPPLY ISSUE, THIS MAY BE A 2 GAUGE CABLE. -

ABC419: BATTERY CABLE: Fits Allis Models-ALLIS MODELS - INSULATED --- 2 GAUGE, LENGTH = 27" --- HEAVY DUTY STRAIGHT TERMINALS --- WHILE WE DEAL WITH A SUPPLY ISSUE, THIS MAY BE A 2 GAUGE CABLE. -

ABC421: BATTERY CABLE: Fits Allis Models-ALLIS MODELS - HEAVY DUTY, STRAIGHT TERMINALS --- GROUND CABLE, NON-INSULATED --- 2 GAUGE, LENGTH = 19" -

MIS065: BATTERY DISCONNECT SWITCH: Fits Allis Models-ALLIS MODELS - STOPS BATTERY DRAIN --- DISCOURAGES VEHICLE THEFT --- EASY TO INSTALL --- USA MADE -

FDS369: BATTERY RETAINER: Fits Allis Models-D17 GAS UP TO SN 24000 USING GROUP 1 BATTERY - ALL GAS MODELS & W/6-VOLT BATTERY --- 9-3/16" WIDE x 7-1/16" LONG: MOUNTING HOLES C.C. = 10-1/8" --- USA MADE - AC: 229487 --- JD: AB3586R & AL2818T --- MH: 33350A --- OLIVER: K1391 & BS1391B --- FORD: NCA10718A --- MF: 181711M91

ACS195: BATTEY BOX W/ LID: Fits Allis Models-D10, D12 - USA MADE - 233332

ACS134: BLACK STEERING WHEEL: Fits Allis Models-ED40, D10, D12, D14, D15, D17, D19, D21, I-40, I-400, I-60, I-600 --- ALLIS COMBINES: A2, C, E, E3, F, K - JUST LIKE ORIGINAL --- ALL NEW MATERIAL, STEEL SPOKES --- 17 1/2" DIAMETER --- SPLINED HUB --- 3 COVERED SPOKES - 232033

MIS006BK: BLACK TIE ON SEAT CUSHION: Fits Allis Models-ALLIS MODELS - USA MADE --- 19 - 21" PAN SIDE TO SIDE --- BIG BUCKET --- 1-3/4" THICK CUSHION. --- 2 DRAIN HOLES - COCKSHUTT: 19T021

ACS070: BONDED BRAKE SHOES --- PAIR: Fits Allis Models-G, D10, D12, D14, D15 - 1 PAIR IS FOR 1 WHEEL ONLY - 800487, 230872, 228859

BOK075: BOOK - HOW TO RESTORE YOUR FARM TRACTOR: Fits Allis Models-ALLIS MODELS - SFTBD., 8-1/4" X 10-5/8", 176 PGS., 10 COLOR, 200 B/W FOR FUN, PRACTICALITY OR PROFIT, FARM TRACTOR RESTORATION HAS BECOME EXTREMELY POPULAR. FOLLOW TWO TRACTORS THROUGH PROFESSIONAL RESTORATIONS AND EXAMINE CARBS, DIESEL SYSTEMS, HYDRAULICS, ENGINES AND DRIVES, ELECTRICAL, PTO'S, AND MORE. FROM BUYING A TRACTOR TO FINAL PAINT AND DECALS, THIS BOOK HELPS YOU TO DO IT RIGHT SO YOUR CLASSIC WILL LAST FOR GENERATIONS TO COME. THIS UPDATED EDITION REFLECTS CHANGES IN THE HOBBY. FEATURES INCLUDE A NEW INTRODUCTION, AN UPDATED SUPPLIERS LIST AND SELECT COLOR PHOTOGRAPHY, ALL WRAPPED INTO A NEW PAGE DESIGN! BY ROBERT N PRIPPS -

BOK070: BOOK - THE AMERICAN BARN: Fits Allis Models-ALLIS MODELS - PAPERBACK - 10" x 10" PRESENTS A COLORFUL LOOK AT THIS CLASSIC AMERICAN STRUCTURE AND ITS EVOLUTION THROUGH THE YEARS. THE DETAILED TEXT EXAMINES HOW STYLES DEVELOPED OUT OF NECESSITY AND HOW THE AMERICAN BARN CONTRIBUTED TO THE EFFICIENCIES AND FUNCTIONALITY OF THE FARM. BY RANDY LEFFINGWELL -

BOK069: BOOK - TRACTORS: ICONS OF THE AMERICAN LANDSCAPE: Fits Allis Models-ALLIS MODELS - SFTBD., 10" X 10", 156 PGS., 175 COLOR BEGINNING WITH A CASE STEAMER AND ENDING WITH THE CAT CHALLENGER, THIS BOOK TRACES THE DEVELOPMENT OF FARM MACHINERY FROM CRUDE FRICTION-DRIVEN MACHINES TO 300-HORSEPOWER COMPUTER CONTROLLED BEHEMOTHS. BY RANDY LEFFINGWELL -

BOK029: BOOK--ALLIS TRACTORS BY:C.H. WENDEL & ANDREW MORLAND: Fits Allis Models-ALLIS MODELS - ALLIS CHALMERS IS ONE OF AMERICA'S MOST POPULAR AND LONG-STANDING CLASSIC AMERICAN TRACTOR MARQUEES.SFTBD., 9" C 10-1/2" 128 PGS., 80 COLOR PHOTOS. -

ACS223: BOTTOM CUSHION: Fits Allis Models-D10, D12, D14, D15, D17, D19, D21; WILL ALSO FIT 170, 175, 180, 185, 190, 190XT, 210 & 220 IF USING 2-PIECE SEAT WITHOUT ARM RESTS - RESTORATION QUALITY, CUSHION EMBOSSED, LIKE ORIGINAL -

ACS115: BOTTOM OIL CUP: Fits Allis Models-G - - AC: 800760 --- MH: 1500476M91

ACS111: BOTTOM SEAT CUSHION: Fits Allis Models-B, C - 28" LONG, 15" WIDE, 4" TALL --- NOTE: ACS111 IS BLACK VINYL, WOOD BACKED. -

ABC446: BRACKET FOR RUNNING BOARD/FOOT PLATFORM: Fits Allis Models-ALLIS MODELS - USE WITH ABC439 & ABC440 - 180590M1 --- 4510

ACS007: BRAKE DRUM: Fits Allis Models-G, D10, D12, D14, D15 - - AC: 800668, 227528, 239542, 70239542

ACS091: BRAKE DRUM: Fits Allis Models-B, C, LEFT SIDE OF CA - - AC:205527

ACS268: BRAKE ROD RETURN SPRING: Fits Allis Models-WD, WD45 - 6 5/8" LONG - MADE IN USA - 222670

ACS300: BRAKE ROD RETURN SPRING: Fits Allis Models-G - SOLD INDIVIDUALLY --- TWO USED PER TRACTOR --- 9-9/16" OVERALL LENGTH - 800013

ABC017: BRAKE SHOE LINING SET: Fits Allis Models-B, IB, C, CA - SET INCLUDES 2 LININGS W/ RIVETS --- 1 SET FOR 1 WHEEL ONLY - 209864

ABC164: BRAKE SHOE LINING SET: Fits Allis Models-D17 SN 42001 & UP, D19, D21, 170, 175, 180, 185, 190 - SET INCLUDES 2 LININGS WITH RIVETS --- 1 SET FOR 1 WHEEL ONLY -

ACS251: BRAKE SHOE LINING SET: Fits Allis Models-G, D10, D12, D14, D15 UP TO SN 9000 - SET INCLUDES: 2 LININGS W/ RIVETS --- 1 SET FOR 1 WHEEL ONLY -

ACS252: BRAKE SHOE LINING SET: Fits Allis Models-WD, WD45, WD45D, D17 UP TO SN 42000 - -

ACS271: BRAKE SHOE RETURN SPRING: Fits Allis Models-B, C, CA - 3-1/2" OVERALL LENGTH - AC:207320

ACS298: BRAKE SHOE SPRING: Fits Allis Models-G - SOLD INDIVIDUALLY --- 4 USED PER TRACTOR --- 2-3/16" OVERALL LENGTH --- MADE IN USA - 800403

ABC385: BRASS NUT: Fits Allis Models-ALLIS MODELS - SOLD INDIVIDUALLY --- FOR REAR TIRE INNER TUBE VALVE -

ACS281: CAM LOCK BOLT: Fits Allis Models-B SN 58401 & UP, IB, C - RIM CLAMP BOLT FOR ECCENTRIC STYLE RIM CLAMP - 210218

FXG2002A-2: CAP: Fits Allis Models-B, IB,C, RC, WC, WF, WD, OTHER MODELS - -