Allis Chalmers Product List

This information is presented by Steiner Tractor Parts, Inc. We are pleased to offer the following products for Allis Chalmers. Printable Version Available Here
Steiner Tractor Parts, Inc. is the premier supplier of restoration quality parts  for antique tractors.  Check out our company blog for more information on our company and to view pictures from our most recent tractor show.  You can also view the Allis Products on our website.  We strive to provide top quality parts and superb customer service.  Give us a chance to supply the restoration parts you need for your old iron, we’d be glad to help!

IHS338: CAP: Fits Allis Models-ENGINE OIL CAP: G --- AUXILIARY TANK GAS CAP: B, C, CA, WC, WF, WD, WD45, D14, D17 --- POWER STEERING CAP: WD45 GAS & DIESEL - MADE IN USA. IMPROVED QUALITY. DIP STICK IS NOT INCLUDED --- THIS CAP IS USED / CAN BE USED FOR THE FOLLOWING PURPOSES ON VARIOUS MODELS: --- AUXILIARY TANK GAS CAP --- POWER STEERING RESERVOIR CAP --- OIL FILLER CAP --- ENGINE OIL CAP - AC: 800228, 204827, 800287, 202963 --- MM: RE180A --- JD: AF2155R --- MH: 12648G

ABC297: CARB ELBOW & STRAINER ASSEMBLY: Fits Allis Models-ALLIS MODELS - MUST HAVE INTERNAL THREADS --- USED WITH FLAIR FITTING NOT COMPRESSION FITTING - MF: 1751212M91 --- FORD: 9N9553

ABC036: CARBURETOR FLOAT (MARVEL SCHEBLER): Fits Allis Models-B, IB, C, CA, WC, WD, WF, D14, D15, RC - MAKE SURE THAT YOUR CARBURETOR MANUFACTURER NUMBER IS IN THE LIST THIS FITS!!!!! FOR SMALL BOWL MARVEL SCHEBLER CARBS - AC: 219985 --- CASE: B51772 --- FORD: 9N9550A --- INTERNATIONAL: 69919D --- MH: 15480A --- MF: 15480A --- OLIVER: HS7605 --- COCKSHUTT: TO7074

ABC037: CARBURETOR FLOAT (MARVEL SCHEBLER): Fits Allis Models-WD45, D15, D17, 170, 175 - MAKE SURE THAT YOUR CARBURETOR MANUFACTURER NUMBER IS IN THE LIST THIS FITS!!!!! FOR LARGE BOWL MARVEL SCHEBLER CARBURETORS - AC: 226456 --- MM: KS7605 --- MH & MF: 1508838M91 --- 381962R1 --- FORD: 311608

ABC361: CARBURETOR FLOAT (MARVEL SCHEBLER): Fits Allis Models-D19 - MAKE SURE THAT YOUR CARBURETOR MANUFACTURER NUMBER IS IN THE LIST THIS FITS!!!!! FOR MARVEL SCHEBLER CARBS - JD: AH11983 --- CASE: B51773

ACS075: CARBURETOR FLOAT (MARVEL SCHEBLER): Fits Allis Models-G - MAKE SURE THAT YOUR CARBURETOR MANUFACTURER NUMBER IS IN THE LIST THIS FITS!!!!! - AC: 800472 --- MH: 1500139M91

ABC190: CARBURETOR FLOAT (ZENITH): Fits Allis Models-B, IB, C, CA ,WF, RC, WC, --- D10, D12, D14, D15 - MAKE SURE THAT YOUR CARBURETOR MANUFACTURER NUMBER IS IN THE LIST THIS FITS!!!!! FITS MODELS WITH MENTIONED ZENITH CARBURETORS - COCKSHUTT: 11080, 10432 --- CASE: C85-28

ABC408: CARBURETOR TO MANIFOLD MOUNTING GASKET: Fits Allis Models-B, IB, C, CA, RC, WC, WF, WD, WD45, D10, D12, D14, D15, D17, I70, I75 - 2-3/8" - 2-7/16" SLOTTED BOLT HOLES, 1-3/16" CENTER HOLE --- CHECK MEASUREMENTS BEFORE ORDERING - FORD: 9N-9448 (2 PCS), 9N9447 (1 PC)

ABC410: CARBURETOR TO MANIFOLD MOUNTING GASKET: Fits Allis Models-D19 GAS - 2-15/16"C.C. BOLT HOLES --- 1-5/8" CENTER HOLE --- CHECK MEASUREMENTS BEFORE ORDERING -

ABC223: CARBURETOR, NEW ZENITH REPLACEMENT: Fits Allis Models-B, IB, C, CA (1952-56), D10, D12 - NEW, ZENITH REPLACEMENT --- 2-5/16" TO 2-3/8"C.C. STUD HOLES (BECAUSE OF THE SMALLER DIAMETER STUDS THAT ARE INCLUDED) --- LENGTH = 4.88" --- FOR SOME APPLICATIONS YOU MUST TRIM THROTTLE SHAFT TO CLEAR THE BLOCK -

MIS089: CHAIN HOOK: Fits Allis Models-ALLIS MODELS - 5/16" -

MIS090: CHAIN HOOK: Fits Allis Models-ALLIS MODELS - 3/8" -

JDS589CH: CHROME DASH LIGHT COVER: Fits Allis Models-D10, D12, D14, D15, D17, D19, D21, I70, 175, 180, 185, 190, 190XT, 200, 210, 220, I40, I400, I60, I600 - 1-1/4" DIAMETER --- CHROME - AC: 234357 --- JD: B3267R

ACS230: CHROME EXHAUST STACK: Fits Allis Models-B, IB, C, CA, RC, D10, D12, D14, D15 UP TO SN 9001 - USA MADE --- STRAIGHT PIPE --- DOUBLE WALL, LINED --- 3" OUTSIDE DIAMETER --- 5" BASE + 24" BODY = 29" OVERALL -

ACS231: CHROME EXHAUST STACK: Fits Allis Models-B, IB, C, CA, RC, D10, D12, D14, D15 UP TO SN 9001 - USA MADE --- WITH BEND --- CHROME DOUBLE WALL LINED --- 3" O.D. --- 5" BASE + 24" BODY = 29" OVERALL -

IHS572: CHROME EXHAUST STACK --- (W/BEND): Fits Allis Models-B, C, CA - CHROME DOUBLE WALL LINED --- USA MADE --- 1 5/16" I.D. OF THE PIPE --- 2 1/2" O.D. OF THE BODY --- 18" TALL + 3" BASE --- *NOTE: FOR AC APPLICATIONS AN EXPANSION GROOVE MUST BE CUT IN BASE -

IHS571: CHROME EXHAUST STACK (STRAIGHT): Fits Allis Models-B, C, CA - CHROME DOUBLE WALL LINED --- USA MADE --- 1 5/16" I.D. OF THE PIPE --- 2 1/2" O.D. OF THE BODY --- 18" TALL + 3" BASE --- *NOTE: FOR AC APPLICATIONS AN EXPANSION GROOVE MUST BE CUT IN BASE -

ACS189: CLUTCH INSPECTION COVER PLATE: Fits Allis Models-B, IB, C, CA - W/ SPRING STEEL CLIPS - 208465

ACS270: CLUTCH RETURN SPRING: Fits Allis Models-B SN 101 - 124037, IB UP TO SN 2836, C, CA UP TO SN 30611 - 4-1/8" OVERALL LENGTH - 225646, 207941

ABC496: CLUTCH THROW OUT BEARING (IH TORQUE AMPLIFIER RELEASE BEARING): Fits Allis Models-B, C, CA ALL W/9" CLUTCH; D10 UP TO SN 3500, D12 UP TO SN 3000, D14 UP TO SN 3000, D15 UP TO SN 3000, D17 UP TO SN 75000, D19, 180, 185, 190, 190XT, 200, ED40, H3, HD3, --- AC COMBINES: A, A2, C, C2, F, F2, F3, L UP TO SN 4316, M, M2, M3. - -

FXH2403: COIL: Fits Allis Models-B, C, RC, WC, WF, WD, OTHER MODELS - -

FM05: COIL ONLY: Fits Allis Models-ALLIS MODELS - MOST MULTI-CYLINDER FM SERIES MAGNETOS -

ACS306: COMPLETE CARBURETOR REPAIR KIT: Fits Allis Models-G - FOR USE WITH LISTED CARBURETOR --- MADE IN USA --- KIT CONTAINS: CHOKE & THROTTLE SHAFTS, NEEDLE & SEAT VALVE, FLOAT LEVER PIN, MISCELLANEOUS PLUGS & SCREWS, THROTTLE SHAFT SEALS & GASKETS -

ABC175: COMPLETE CARBURETOR REPAIR KIT (ZENITH): Fits Allis Models-B, IB, C, RC - MAKE SURE THAT YOUR CARBURETOR MANUFACTURER NUMBER IS IN THE LIST THIS FITS!!!!! KIT CONTAINS: CHOKE & THROTTLE SHAFTS, NEEDLE & SEAT VALVE, FLOAT LEVER PIN, MISCELLANEOUS PLUGS & SCREWS, THROTTLE SHAFT SEALS & GASKETS -

ABC178: COMPLETE CARBURETOR REPAIR KIT (ZENITH): Fits Allis Models-WC, WD, WF - MAKE SURE THAT YOUR CARBURETOR MANUFACTURER NUMBER IS IN THE LIST THIS FITS!!!!! KIT CONTAINS: CHOKE & THROTTLE SHAFTS, NEEDLE & SEAT VALVE, FLOAT LEVER PIN, MISCELLANEOUS PLUGS & SCREWS, THROTTLE SHAFT SEALS & GASKETS -

ABC180: COMPLETE CARBURETOR REPAIR KIT (ZENITH): Fits Allis Models-C - MAKE SURE THAT YOUR CARBURETOR MANUFACTURER NUMBER IS IN THE LIST THIS FITS!!!!! KIT CONTAINS: CHOKE & THROTTLE SHAFTS, NEEDLE & SEAT VALVE, FLOAT LEVER PIN, MISCELLANEOUS PLUGS & SCREWS, THROTTLE SHAFT SEALS & GASKETS -

ABC232: COMPLETE CARBURETOR REPAIR KIT (ZENITH): Fits Allis Models-B, IB, C, RC - MAKE SURE THAT YOUR CARBURETOR MANUFACTURER NUMBER IS IN THE LIST THIS FITS!!!!! KIT CONTAINS: CHOKE & THROTTLE SHAFTS, NEEDLE & SEAT VALVE, FLOAT LEVER PIN, MISCELLANEOUS PLUGS & SCREWS, THROTTLE SHAFT SEALS & GASKETS -

FM01: CONDENSOR: Fits Allis Models-ALLIS MODELS - -

FXH2024: CONDENSOR: Fits Allis Models-B, IB, C, RC, WC, WD, WF, OTHER MODELS - -

ACS215: CONTROL LEVER KNOB: Fits Allis Models-D10, D12, D14, D15, D17, D19 --- LAWN & GARDEN 116, 122 - 3 USED PER TRACTOR, SOLD INDIVIDUALLY - 228215

MHS043GK: CORK GASKET: Fits Allis Models-D10, D12, D14, D15, D17, D19, 170, 175, 180, 185, I-40, I-400, I-60, I-600 - O.D. = 2-9/16" --- I.D. = 1-1/2" -

ACS058: CRANK HOLE CASTING: Fits Allis Models-G - MADE IN THE USA - AC:800086

ACS131: CRANKSHAFT: Fits Allis Models-G - - AC: N62C500

ACS073: CRANKSHAFT: Fits Allis Models-D10, D12, D14, D15 GAS I40, I-400, I-60, I-600 - - AC:227550

ACS074: CRANKSHAFT: Fits Allis Models-WD45 GAS - - 226535

ACS250: CRANKSHAFT MAIN BEARINGS: Fits Allis Models-G - 4 PIECE SET: 2 BEARINGS STANDARD - NOT OVER, NOT UNDER. - AC: 800498 --- MH: BRG: 1000155M92

ACS069: CRANKSHAFT PULLEY: Fits Allis Models-WD, WD45 - DOUBLE GROOVE POWER STEERING W/ CONE SHAPED ALLEN SCREW - 227395

ACS089: CRANKSHAFT PULLEY: Fits Allis Models- D14, D10 UP TO SN 3500, D12 UP TO SN 3000 - 5" PULLEY DIAMETER --- 5/8" BELT WIDTH - AC:236741, CASTING # AM4529

ACS154: CRANKSHAFT PULLEY W/ SET SCREW: Fits Allis Models-D10 SN 3501 & UP, D12 SN 3001 & UP, D15 GAS - 5 1/16" PULLEY DIAMETER --- 3/8" BELT WIDTH - 235043, 233396 --- CASTING: AM4761 --- 902870 (SET SCREW)

ACS033: CREEPER GEARS --- (PAIR): Fits Allis Models-G - GEAR SPECIAL LOW49 TEETH --- PINION 14 TEETH - PINION AC:800382 --- GEAR AC:800381

ACS138: CRÈME EMBLEM --- STEERING WHEEL --- FRONT NOSE: Fits Allis Models-ED40, D10, D12, D14, D15, D17, D19, D21 --- COMBINES: A2, C, E, E3, F, K --- LAWN & GARDEN 116, 122, 616, 622 - DIE CAST, CHROMED, CRÈME PAINTED BACKGROUND - 228474, 246724, 233852

ACS137: CRÈME STEERING WHEEL: Fits Allis Models-ED40, D10, D12, D14, D15, D17, D19, D21, I-40, I-400, I-60, I-600 --- ALLIS COMBINES: A2, C, E, E3, F, K - JUST LIKE ORIGINAL, ALL NEW MATERIAL, STEEL SPOKES --- 17 1/2" DIAMETER --- SPLINED HUB --- 3 COVERED SPOKES --- CRÈME - 233851

ACS171: CURVED GEAR SHIFT LEVER: Fits Allis Models-WD45, LATE WD (SN: 127007 & UP) - DOES NOT INCLUDE PINS - 257580

CAT-D: DEALER CATALOG: Fits Allis Models-ALLIS MODELS - THIS IS A PARED DOWN VERSION OF OUR CATALOG. IT IS PRINTED WITHOUT ANY INFORMATION ABOUT STEINER TRACTOR PARTS AND WITHOUT ANY PRICES. THIS CATALOG IS DESIGNED FOR DEALERS TO DISTRIBUTE TO THEIR CUSTOMERS. -

ABC500: DELCO DISTRIBUTOR TERMINAL INSULATOR (SQUARE SHOULDER): Fits Allis Models-FITS THE FOLLOWING WITH DELCO DISTRIBUTORS IB, B, C, CA, RC, WC, WF, WD, WD45, D10, D12, D14, D15, D17, D19 - NOTE AS DISTRIBUTORS CAN BE CHANGED THROUGHOUT THE YEARS IT IS BEST TO SEE WHICH STYLE YOU NEED THIS IS JUST A GUIDE OF WHAT WAS ORIGINAL. SQUARE STYLE INSULATOR NOTE: SQUARE WAS THE LATE STYLE FITS DISTRIBUTOR HOUSINGS WITH .300 DIAMETER HOLE WITH A KEYWAY IF NOT SURE MEASURE BEFORE ORDERING - AC: 225794, 225791, 225793, 225792, 225795, IH AVERY & CASE: 1914142, 1914144, 1916806, 1916805, 817363, 120622, FERGUSON: 354119X, 1750520M1, 1750514M1, 353444XL, 22303X, OLIVER: 1K7430, 1H7431, 1K7433, 1K7434A, 1H7437, 1K7445, 7A7820, COCKSHUTT: MA625, MA626, MA627, MA628, MA624, MA629, MA467, JOHN DEERE: 1914142, 1916805, 1916806, 1909206, 1916806, 817363, 12H290R

ABC498: DELCO DISTRIBUTOR TERMINAL INSULATOR ASSY (ROUND SHOULDER): Fits Allis Models-G - NOTE AS DISTRIBUTORS CAN BE CHANGED THRUOUT THE YEARS IT IS BEST TO SEE WHICH STYLE YOU NEED THIS IS JUST A GUIDE OF WHAT WAS ORIGINAL. FITS DISTRIBUTOR HOUSINGS WITH .345 DIAMETER ROUND HOLE IF NOT SURE MEASURE BEFORE ORDERING ROUND WAS THE EARLY STYLE - AC-1878405 1847646, 1847647 COCKSHUTT-MA625, MA466, MA798, MA789, MA790, MA797, MA799, MA466, MA467 IH-1878405 1847646, 1847647 MH-1750438M1, 357119-1750455ML, 353444XL, 22303X MM-1878405 1847646, 1847647 JD-1878405, 1847646, 1847647, 810794, 817363 OLIVER-1H7437, 1H7436, 1H7434, 1H7433, 1H7432, 1H7431, 1H7430

ABC520: DELCO ROTOR BUTTON: Fits Allis Models-FOLLOWING DELCO WITH CLIP HELD CAP: B, IB, C, CA, G, RC, WC, WD, WD45, WF, D10, D12, D14, D15, D17, D19 - - JD-IH-CASE: 1905590, MF: 1750498M1, AC: SERVICEABLE FOR 70225736, AC: 1921285, COCKSHUTT-OLIVER: 609119A, MM: 10P2989

ABC276: DISTRIBUTOR CAP: Fits Allis Models-B, IB, C, G, CA, WD, WD45, WC, WF, D10, D12, D14, D15, D17, RC - DELCO REMY DISTRIBUTORS MUST HAVE CLIP HELD CAP THRU 1963 - AC: 225733 --- DELCO: 811735 --- CASE: 811735 --- COCKSHUTT: MA0-595 --- MF: 1750411M91 --- OLIVER: H7406

ABC330: DISTRIBUTOR CAP: Fits Allis Models-D19 - FOR 6 CYLINDER MODELS --- WITH DELCO REMY DISTRIBUTORS --- WITH CLIP HELD CAP - AC:74042704 --- DELCO:824735 --- CASE:824735 &: MA756 --- WHITE: K7406 --- MM:19P3031 --- COCKSHUTT: MAO-602

ABC420: DISTRIBUTOR CAP, 6 CYL, DELCO SCREW HELD: Fits Allis Models-180, 190 - FITS LISTED MODELS WITH SCREW HELD CAP - DELCO: 1960810 --- MF: 1033100MR1 --- OLIVER: 156356AS --- MM: 10P3023

ABC186: DISTRIBUTOR DUST COVER WITH FELT GASKET & WASHER: Fits Allis Models-B, IB, C, G, CA, WD, WD45, WC, WF, D10, D12, D14, D15, D17, D19, RC - FOR EARLY DELCO REMY DISTRIBUTOR WITH CLIP HELD CAP - AC: 225734, DELCO: 1900119 --- COCKSHUTT: MA0-602 --- MF: 1750491M91 --- OLIVER: H7413 --- DELCO: 1900119

FDS211: DRAW BAR LOCK: Fits Allis Models-FOLLOWING UP W/ 3 PT D15, I60, I600 - WILL FIT STP FDS022 DRAWBAR --- CATEGORY I - FORD: 9N5182L

ACS261: DRAW BAR YOKE ASSEMBLY: Fits Allis Models-D17 SERIES 1 & II & III W/ SNAP COUPLER HITCH, D14, D15 - ON D14 & D15 IT WILL MAKE A HEAVY DUTY DRAWBAR. - 232074, 232073, 231146, 224650

ACS310: DRAWBAR: Fits Allis Models-LIKE ORIGINAL G UP TO SN 26750, FUNCTIONAL ON G SN 26751 & UP - MADE IN USA, 21-3/16" LONG - 800455

MIS091: DRAWBAR CLEVIS HOOK: Fits Allis Models-ALLIS MODELS - ALL TRACTOR DRAWBARS WITH 3/4" HOLES UP TO AND INCLUDING 1 1/4" THICK. USE WITH CHAIN SIZES 5/16" TO 1/2", INCLUDING HIGH TEST CHAIN. PIN #30835 IS FORGED AND TREATED. -

ACS184: DRAWBAR COUPLER LEVER & HYDRAULIC LEVER KNOB: Fits Allis Models-HYDRAULIC LEVER: CA, G --- DRAWBAR COUPLER LEVER: WD, WD45, D10, D12, D14, D15, D17, 180, 185, 190, 190S5, 200, 210, 220 - - 220901

ACS301: DRAWBAR HANGER: Fits Allis Models-G - MADE IN THE USA - 800454

FDS336: DUST BOOT: Fits Allis Models-ALLIS MODELS - UNIVERSAL --- BASE X HEIGHT X HOLE I.D. --- 1.200 X .475 X .500 - MF: 185452M1, 180360M1, 180361M1

ABC309: ECONOMY CARBURETOR REPAIR KIT: Fits Allis Models-B, IB, C, CA, RC, WC, WF, WD, D10, D12 - MAKE SURE THAT YOUR CARBURETOR MANUFACTURER NUMBER IS IN THE LIST THIS FITS!!!!! CONTAINS: FLOAT VALVE, FLOAT LEVER PIN, CHOKE & THROTTLE SHAFT SEALS, NEEDLE VALVE, GASKETS & INSTRUCTIONS - RWL: 10136 --- SWL: 9667 --- VAL: 11506 &: 11106

ABC220: ECONOMY CARBURETOR REPAIR KIT (MARVEL SCHEBLER): Fits Allis Models-B, IB, CA, RC, WC, WF, WD, D15, D14 - MAKE SURE THAT YOUR CARBURETOR MANUFACTURER NUMBER IS IN THE LIST THIS FITS!!!!! CONTAINS: --- FLOAT VALVE, FLOAT LEVER PIN, CHOKE & THROTTLE SHAFT SEALS, NEEDLE VALVE, GASKETS, INSTRUCTIONS -

ACS051: ECONOMY CARBURETOR REPAIR KIT (MARVEL SCHEBLER): Fits Allis Models-G - MAKE SURE THAT YOUR CARBURETOR MANUFACTURER NUMBER IS IN THE LIST THIS FITS!!!! CONTAINS: --- BOWL GASKET, 2 O-RINGS, NEEDLE VALVE & SEAT, FLOAT SHAFT, IDLE ADJUSTMENT SCREW, PACKINGS & RETAINERS -

FDS212: ECONOMY CARBURETOR REPAIR KIT (MARVEL SCHEBLER): Fits Allis Models-WD45, D15, D17, 170, 175, 180, 185 - MAKE SURE THAT YOUR CARBURETOR MANUFACTURER NUMBER IS IN THE LIST THIS FITS!!!!! CONTAINS: --- FLOAT VALVE, FLOAT LEVER PIN, CHOKE & THROTTLE SHAFT FELT SEALS, NEEDLE VALVE, GASKETS, INSTRUCTIONS -

ABC222: ECONOMY CARBURETOR REPAIR KIT (ZENITH): Fits Allis Models-WC, WF - MAKE SURE THAT YOUR CARBURETOR MANUFACTURER NUMBER IS IN THE LIST THIS FITS!!!!! CONTAINS: --- FLOAT VALVE, FLOAT LEVER PIN, CHOKE & THROTTLE SHAFT SEALS, NEEDLE VALVE, GASKETS, INSTRUCTIONS --- THROTTLE SHAFT NOT INCLUDED -

ABC497: ECONOMY CHAR-LYNN STEERING COUPLER (FOR TRACTORS WITH U-JOINT): Fits Allis Models-ALLIS MODELS - USE ONLY IF YOU HAVE A UNIVERSAL JOINT AT ONE END OF EXISTING STEERING SHAFT -

ACS197: ELECTRIC BOX PANEL (REAR): Fits Allis Models-WC, RC, WF - - 208129

ABC395: ELECTRICAL OUTLET SOCKET: Fits Allis Models-ALLIS MODELS - 2-PIN TYPE - JD:AM2049T

FM02: END CAP: Fits Allis Models-ALLIS MODELS - -

ACS188: EXHAUST ADAPTOR W/ BRACKET: Fits Allis Models-WC WD, WD45, D17 GAS EXCEPT SERIES IV - INCLUDES BRACKET -

ACS085ELB: EXHAUST ELBOW: Fits Allis Models-WC, WF - WITH 45 DEGREE SIDE EXHAUST OUT OF LEFT SIDE OF HOOD --- MADE IN THE USA - 203178

ABC448: EXHAUST MANIFOLD GASKET MATERIAL: Fits Allis Models-ALLIS MODELS - PERF STEEL CORE, USE TO MAKE MFD GSKTS -

IHS003EXP: EXHAUST PIPE: Fits Allis Models-D19 GAS; COMBINES: A, B, C, F - MUST CUT TO LENGTH ON SOME APPLICATIONS. 2" O.D. X 10-3/8" LONG - COCKSHUTT: TG5153 --- MH: 21389A & 764857M1

ACS187: EXHAUST STACK --- (CHROME STRAIGHT): Fits Allis Models-WC WD, WD45, D17 GAS EXCEPT SERIES IV - CHROME DOUBLE WALL LINED --- 3 1/2" O.D. --- 22 1/2 BODY" + 6 1/2" BASE = 29" OVERALL --- MADE IN THE USA -

ACS186: EXHAUST STACK --- (CHROME W/BEND): Fits Allis Models-WC WD, WD45, D17 GAS EXCEPT SERIES IV - CHROME DOUBLE WALL LINED --- WITH BEND --- 3 1/2" O.D. --- 22 1/2" BODY + 6 1/2" BASE = 29" OVERALL --- MADE IN THE USA -

ACS307: EXHAUST TURBO ELBOW: Fits Allis Models-D19, D21, 210, 220, 7000, 7010, 7020 - - OLD # 236705, 253661

ABC009: FAN BELT: Fits Allis Models-B, IB, C, CA, D10 UP TO SN 3501, D12 UP TO SN 3001, D14 - 11/16" X 38" --- FITS AC TRACTORS LISTED WITH GENERATORS - AC: 209656 --- MH: 852175M1

ABC010: FAN BELT: Fits Allis Models-FOLLOWING WITH GENERATORS: WF, WD, WD45 GAS, WC - 11/16" X 40" - 209824

ABC059: FAN BELT --- (NOTCHED): Fits Allis Models-G - 11/16" X 41-1/2" - FORD: 8N8620

ACS183: FAN BLADE: Fits Allis Models-WC, WD, WF, WD45, D17 GAS - - 227308, 240973

ACS093L: FENDER LEFT HAND: Fits Allis Models-B, C, CA - SAME GAUGE, WEIGHT & MATERIAL AS ORIGINAL EQUIPMENT - 225234

ACS095L: FENDER LEFT HAND: Fits Allis Models-STYLED WC (1940 & UP), RC - INCLUDES MOUNTING BRACKET --- SAME GAUGE, WEIGHT & MATERIAL AS ORIGINAL EQUIPMENT - 208206

ACS097L: FENDER LEFT HAND: Fits Allis Models-WD, WD45 - SAME GAUGE, WEIGHT & MATERIAL AS ORIGINAL EQUIPMENT - 224935

ACS093R: FENDER RIGHT HAND: Fits Allis Models-B, C, CA - SAME GAUGE, WEIGHT & MATERIAL AS ORIGINAL EQUIPMENT - 225236

ACS095R: FENDER RIGHT HAND: Fits Allis Models-STYLED WC (1940 & UP) - INCLUDES MOUNTING BRACKET --- SAME GAUGE, WEIGHT & MATERIAL AS ORIGINAL EQUIPMENT - 208207

ACS097R: FENDER RIGHT HAND: Fits Allis Models-WD, WD45 - SAME GAUGE, WEIGHT & MATERIAL AS ORIGINAL EQUIPMENT - 224934

ABC422: FILTER ELEMENT, OIL BATH AIR CLEANER: Fits Allis Models-USUALLY 2 REQUIRED FOR MODELS B THRU D14. 3 REQUIRED FOR MODELS WC THRU WD - APPROXIMATELY: 3" WIDE X 78" LONG PER BAG --- USES 2 BAGS FOR UTILITY TRACTORS --- ALL BRANDS -

ACS325: FINAL DRIVE HAND CLUTCH LEVER: Fits Allis Models-CA - INCLUDES KNOB AND BOLT --- MADE IN THE USA --- PRIMED - 225582 LEVER, 912195 BOLT, 206456 KNOB

ABC013: FLYWHEEL RING GEAR: Fits Allis Models-B, IB, C, CA - 90 TEETH - 209292

ABC014: FLYWHEEL RING GEAR: Fits Allis Models-WC, RC, WF, WD, WD45 GAS - 100 TEETH - 208132

ACS032: FLYWHEEL RING GEAR: Fits Allis Models-G - 86 TEETH - AC: 800311 --- MH: 1500117M1

ACS206: FLYWHEEL RING GEAR: Fits Allis Models-D10 SN 3501 & UP, D12 SN 3001 & UP, D14 TRACTOR SN 19001 & UP, D14 ENGINE SN 19070 & UP, D15 GAS - 116 TEETH - 233196

ACS207: FLYWHEEL RING GEAR: Fits Allis Models-D17, I70, I75 - 139 TEETH --- ALL MODELS LISTED WITH GAS ENGINE - 226830

ACS149: FRAME WEIGHT SET: Fits Allis Models-CA - SET INCLUDES 2 WEIGHTS. LH & RH ARE THE SAME - AM3786-1

ACS299: FRONT & REAR ELECTRIC BOX PANELS: Fits Allis Models-B, IB, C, CA - - FRONT PANEL: 210913, 225309, 218942 --- REAR PANEL: 210914

ACS283: FRONT BRAKE SPRING: Fits Allis Models- WD, WD45, D17, D19 - 3" LENGTH - OLD: 222500 --- NEW: 70232564

WHS057: FRONT TIRE 4.00/4.80 - 12: Fits Allis Models-G - 4.00/4.80 X 12" -

ACS180: FRONT WEIGHT: Fits Allis Models-RC, WC, WF, WD, WD45, D15, D17, D19 - - REPLACES BOOK: 227272 & CASTING: AM4162-3

WHS042: FRONT WHEEL: Fits Allis Models-ALLIS MODELS - 6" x 15", 6 LUG PILOT HOLE = 4.625" 6" BOLT CIRCLE USA MADE TO DETERMINE BACKSPACING, LAY THE WHEEL FLAT ON THE GROUND WITH THE BACK OF WHEEL FACING UP. NEXT, LAY A STRAIGHTEDGE ACROSS WHEEL AND MEASURE THE DISTANCE FROM THE BACK SIDE OF MOUNTING SURFACE TO THE STRAIGHTEDGE. BACKSPACING = 4.75" -

WHS043: FRONT WHEEL: Fits Allis Models-ALLIS MODELS - 6" x 16", 6 LUG PILOT HOLE = 4.625" 6" BOLT CIRCLE USA MADE TO DETERMINE BACKSPACING, LAY THE WHEEL FLAT ON THE GROUND WITH THE BACK OF WHEEL FACING UP. NEXT, LAY A STRAIGHTEDGE ACROSS WHEEL AND MEASURE THE DISTANCE FROM THE BACK SIDE OF MOUNTING SURFACE TO THE STRAIGHTEDGE. BACKSPACING = 4.75" -

WHS044: FRONT WHEEL: Fits Allis Models-ALLIS MODELS - 8" x 15", 6 LUG PILOT HOLE = 4.625" 6" BOLT CIRCLE USA MADE TO DETERMINE BACKSPACING, LAY THE WHEEL FLAT ON THE GROUND WITH THE BACK OF WHEEL FACING UP. NEXT, LAY A STRAIGHTEDGE ACROSS WHEEL AND MEASURE THE DISTANCE FROM THE BACK SIDE OF MOUNTING SURFACE TO THE STRAIGHTEDGE. BACKSPACING = 5.75" -

WHS045: FRONT WHEEL: Fits Allis Models-VARIOUS MODELS - 8" x 16", 6 LUG PILOT HOLE = 4.625" 6" BOLT CIRCLE USA MADE TO DETERMINE BACKSPACING, LAY THE WHEEL FLAT ON THE GROUND WITH THE BACK OF WHEEL FACING UP. NEXT, LAY A STRAIGHTEDGE ACROSS WHEEL AND MEASURE THE DISTANCE FROM THE BACK SIDE OF MOUNTING SURFACE TO THE STRAIGHTEDGE. BACKSPACING = 4.75" THIS IS A WHEEL THAT IS DIFFERENT THAN ORIGINAL IT FITS MOST MODELS IF THE CUSTOMER ISNT CONCERNED ABOUT LOOKS -