Product Data John Deere
This information is presented by Steiner Tractor Parts, Inc.  We are pleased to offer the following products for John Deere tractors.  Digital Catalog Available Here!
Steiner Tractor Parts, Inc. is the premier supplier of restoration quality parts for antique tractors.  Check out our company blog for more information on our company and to view pictures we’ve taken of tractor shows and trips.  You can also view the John Deere Products on our website.  We strive to provide top quality parts and superb customer service.  Give us a chance to supply the restoration parts you need for your old iron, we’d be glad to help!

ABC460: SEALED BEAM BULB (12 VOLT-HI): Fits John Deere Models-520, 530, 620 STD / ORCHARD (GAS / LP, SN 6213100 &UP), 630, 720, 720D STD (ELECTRIC START SN 7222600 & UP), 720D ROW CROP (ELECTRIC START SN 7222600 & UP), 730 STD (GAS / LP / ALL-FUEL), 820 (ELECTRIC START SN 8203100 & UP), 830 (ELECTRIC START), 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030 - 12 VOLT HI BEAM - 4410

JDS668: SWITCH LEVER ONLY: Fits John Deere Models-M, 40, 50, 60, 70, 320, 330, 420, 430, 435, 440, 520, 530, 620, 630, 720, 730, 1020, 1520, 2020, 8430, 8630 - WITHOUT HARDWARE - A4653R, 1902694

ABC042: 1 PIECE OIL FILL/ BREATHER CAP: Fits John Deere Models-M, MC, MT, MI, 40, 320, 330, 420, 430, 1010 - ECONOMY STYLE --- IF ORIGINAL STYLE IS NEEDED PLEASE SEE JDS500 - 8N6766B

WHS029: 10 X 38 (DEEP DROP CENTER) REAR RIM: Fits John Deere Models-A, B, G - MUST USE OLD STOP BLOCKS - 55563D

ACS028: 11 X 28 REAR RIM (SPINOUT): Fits John Deere Models-JD MODELS - 4 RAILS --- HOLES FOR STOP ADJUSTMENT ARE DRILLED 90 DEGREE PERPENDICULAR TO SIDE OF RIM NOT 90 DEGREES TO RAIL --- USA MADE --- STOP HOLES ARE ANGLED - AC: 220011

WHS018: 11 X 38 REAR RIM (DEEP DROP CENTER): Fits John Deere Models-FOR THESE MODELS CUSTOMER MUST USE THEIR OLD STOP BLOCK: A, B, G, 70 - INCLUDES STOP BLOCK --- USA MADE - 55564D --- MH 7632252M1

ABC359: 12 VOLT BULB: Fits John Deere Models-EARLY A (SN 477000 - 500011), EARLY B (SN 60000 - 95999), D (SN 35310 - 143799) - DOUBLE CONTACT --- WILL FIT O.E.M. 5-3/4" 6-VOLT & 12-VOLT -

JDS974: 12 VOLT CIGARETTE LIGHTER KIT: Fits John Deere Models-50, 520, 530, 60, 620, 630, 70, 720, 730, 830 ELECTRIC START - - AR20458R, AA5734R

JDS980: 12 VOLT COMBINATION STARTER & LIGHT SWITCH W/O LEVER: Fits John Deere Models-50 GAS (SN 5021280 & UP), 50 LP (SN 5024000 & UP), 60 (SN 6026000 & UP), 60 STD (SN 6043000 & UP), 70 LP, 70 STD LP, 520 GAS / ALL-FUEL / LP, 620 GAS / ALL-FUEL / LP, 620 ORCHARD (GAS / ALL-FUEL / LP, UP TO SN 6222999), 720 (GAS / LP / ALL-FUEL) - 6 SCREW TERMINALS - AA5397R

JDS667: 12 VOLT COMBINATION SWITCH: Fits John Deere Models-530, 630, 730 - 6 SPADE TERMINALS --- IGNITION & LIGHT --- WITHOUT LEVER --- WILL NOT WORK WITH DIESEL MODELS - AR20430

JDS606: 12 VOLT COMPLETE HEADLIGHT ASSEMBLY: Fits John Deere Models-STYLED A (WITH SHEET METAL DASH), AO, AR, B (WITH SHEET METAL DASH), BN, BNH, D (SN 143800 & UP), H, R, 50, 60, 70, 70D, 80, 520, 620, 720, 720D, 820, 530, 630, 730, 730D, 830 - 12-VOLT --- HAS CORRECT STUD LENGTH --- 4-3/4" DIAMETER CURVED LENS --- STUD LENGTH IS 1 3/16" --- CAN BE INSTALLED ON FRONT OR REAR. --- INTERCHANGEABLE WITH IHS352, IHS353B, IHS354, IHS436, IHS355, ABC320 & IHS475 --- BLACK, BULLET STYLE --- USA MADE - AC: 208233, 237100 --- COCKSHUTT: TO7720, TO19437, TO19438.

JDS746: 12 VOLT DASH LIGHT: Fits John Deere Models-520 LP, 530 UPPER, 620 (EXCEPT ORCHARD), 630 UPPER DASH LAMP, 720, 720 DSL (ELECTRIC START), 730 UPPER, 730 DSL (UPPER DASH LAMP ON THE ELECTRIC START) - - AR20466R, AR2051R, AF3139R

JDS648V12: 12 VOLT DASH LIGHT ASSEMBLY: Fits John Deere Models-40, 50 (SN 5016123 & UP), 60 ORCHARD / STANDARD (SN 6000001 & UP), 60 ROW CROP (SN 6028350 & UP), 70 (SN 706328 & UP), 320, 330, 420, 430, 435, 440 --- LOWER DASH LAMP FOR: 530, 630, 730, 730D - INCLUDES 12 VOLT BULB - CASE A24087 --- JD AR20432R

ABC155: 12 VOLT EXTERNAL VOLTAGE REGULATOR: Fits John Deere Models-A, G, 50, 60, 70, 520, 530, 620, 630, 720, 730 USING GENERATOR #1100309 - SADDLE MOUNT --- 3 PRONG --- 3 TERMINAL - DELCO 1118991 & A20792 --- REPLACES REGULATOR 1118783

JDS319V12: 12 VOLT HEADLIGHT ASSEMBLY OR REAR WORKLIGHT ASSEMBLY: Fits John Deere Models-HEADLIGHT ON THE FOLLOWING MODELS: 520, 530, 620, 630, 720, 720D, 730, 730D --- REAR WORKLIGHT ON THE FOLLOWING MODELS: A, B, G, R - 4-1/2" --- AS HEADLIGHT, INSTALLS ON FLAT TOP FENDERS --- AS REAR WORKLIGHT, BACK POST INSTALLS ON BACK OF BATTERY BOX - JD AA3867R

IHS455: 12 VOLT REAR COMBO LIGHT ASSEMBLY: Fits John Deere Models-A (SN 477000 - 583999), AR (SN 272000 & UP), AO (SN 272000 & UP), B (SN 96000 - 200999), D (SN 186752 & UP), G (SN 13000 - 25999), H (SN 27000 & UP) - 4-1/2" --- 12 VOLT REAR COMBO LIGHT ASSEMBLY WITH RED JEWEL LENS & ROTARY SWITCH - COCKSHUTT: TO12261 --- JD: AA4762R --- CASE: VTA3396

IHS647: 12 VOLT SEALED BEAM HEADLIGHT ASSEMBLY: Fits John Deere Models-1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2355, 240, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030 - INCLUDES SEALED BEAM BULB #4411 & RUBBER TRIM RING --- FOR FLAT TOP FENDERS --- NOTE: POST IS OUT OF BACK WITH WIRES THRU POST - AC: 267185

ACS026: 12 X 28 REAR RIM (SPINOUT): Fits John Deere Models-JD MODELS - 4 RAILS --- HOLES FOR STOP ADJUSTMENT ARE DRILLED 90 DEGREE PERPENDICULAR TO SIDE OF RIM NOT 90 DEGREES TO RAIL --- STOP HOLES ARE ANGLED - AC: 226270

ABC509: 12V COIL: Fits John Deere Models-JOHN DEERE MODELS - INTERNALLY RESISTED, INCLUDES BRACKET -

ABC154: 12-VOLT EXTERNAL VOLTAGE REGULATOR: Fits John Deere Models-A, D, G, 50, 60 - 4-TERMINAL SADDLE MOUNT - DELCO 1118791 & K7786D, 1118306 --- 1118266, 306, 791, 792 --- MM 10A409, 10A20734

JDS582: 12-VOLT HI SEALED-BEAM HEADLIGHT ASSEMBLY: Fits John Deere Models-520, 530, 620, 630, 720, 720D, 730, 730D - 4-1/2" DIAMETER --- ALSO A TAIL LIGHT 1949 & UP -

JDS520: 12-VOLT LIGHT BULB W/ REFLECTOR: Fits John Deere Models-520, 530, 620, 630, 720, 720D, 730, 730D - THE BULB CAN NOT BE TOUCHED. GLASS WILL BE ETCHED AND BULB WILL BURN OUT -

JDS581: 12-VOLT LO SEALED-BEAM HEADLIGHT ASSEMBLY: Fits John Deere Models-520, 530, 620, 630, 720, 720D, 730, 730D - 4-1/2" --- ALSO A TAIL LIGHT 1949 & UP -

WHS021: 14 X 38 REAR RIM (DEEP DROP CENTER): Fits John Deere Models-A, B, G, 70, - USA MADE --- TO DETERMINE THE WIDTH OF RIMS/WHEELS: MEASURE THE INSIDE FROM BEAD TO BEAD NOT OUTSIDE TO OUTSIDE. -

JDS962: 2 PIECE HYDRAULIC LEVER GUIDE KIT: Fits John Deere Models-2520, 3020 (SN 123000 & UP), 4000, 4020 (SN 201000 & UP), 4320, 4530, 4620, 6030, 7020, 7520 - - R41194 & R41760

JDS002: 2 PIECE INTAKE & EXHAUST MANIFOLD: Fits John Deere Models-60, 620, 630 - - A4640R (INTAKE), A4641R, A5751R (EXHAUST)

JDS004: 2 PIECE INTAKE & EXHAUST MANIFOLD: Fits John Deere Models-50 - - B3211R & B3212R

JDS005: 2 PIECE INTAKE & EXHAUST MANIFOLD: Fits John Deere Models-520, 530 - - B3641R & B3642R

JDS869: 2 PIECE MUFFLER CLAMP: Fits John Deere Models-3010 DSL (SN 6644 & UP), 3020 DSL, 4000, 4010 DSL (SN 7027 & UP), 4020, 4030, 4230, 4040, 4240, 4440 - - R32235, AR46323

PLANNER: 2009 CLASSIC FARM TRACTORS PLANNER: Fits John Deere Models-VARIOUS MODELS - USE THIS ATTRACTIVE WIREBOUND PLANNER TO ORGANIZE YOUR TRACTOR SHOW AND PLOW DAY ATTENDANCE AS WELL AS ALL OF LIFE'S EVENTS. TWO PAGE SPREAD FOR EACH MONTH WITH LOTS OF ROOM FOR NOTES. ALSO EACH MONTH FEATURES A VARIETY OF TRACTOR PHOTOGRAPHS AND INFORMATION. VERY USEFUL AND ATTRACTIVE FOR ANY TRACTOR ENTHUSIAST -

JDS566: 2-3/4" WIRE HOSE CLAMP: Fits John Deere Models-JD MODELS - 2-3/4" --- SIZE PROVIDED IS OUTER DIAMETER (O.D.) OF THE HOSE. PLEASE ORDER BY O.D. OF HOSE. -

JDS279SET: 2-PIECE REAR WEIGHT SET: Fits John Deere Models-420T, 420U, 420W, 430T, 430U, 430W, 435, 440, 420V, 430V - ALL W/ 28" POWER ADJUST WHEELS - JD CASTING NUMBER M3580T

JDS417: 2-PIECE UMBRELLA BRACKET: Fits John Deere Models-A, B, H, D,, L, G, GN, GW - W/ PAN SEAT TYPE 1948 & EARLIER --- USA MADE - JD F517A, F518A & AA4206R

ABC065: 2-WIRE KEY SWITCH WITH 2 KEYS: Fits John Deere Models-JOHN DEERE MODELS - ON SOME APPLICATION MUST DRILL HOLE TO .800 --- 3/4" DIAMETER THREAD --- 4 TERMINALS - FORD 8N3679C --- MH 14491A & 764929M91 --- OLIVER 1K7354B

JDS131GK: 3 CYL DSL EXHAUST MANIFOLD GASKET: Fits John Deere Models-300B, 301, 302, 820, 830, 920, 930, 1020, 1030, 1130, 1520, 1530, 1630, 1830, 2040, 2240 - - T20252

JDS114: 3 PIECE BATTERY COVER SET: Fits John Deere Models-B (SN 96000 - 200999) 1941-MID 1947 - 17 GAUGE --- USA MADE - B1937R (TOP), AB2925R (RH), AB2926R (LH)

FDS022: 3 POINT DRAWBAR: Fits John Deere Models-40, 320, 420, 330, 430, 435, 440, 1010, 2010, 820 (3 CYL), 830 (3 CYL), 650, 655, 770, 790, 990, 750, 755, 870, 4100, 2210, 850, 855, 970, 4200, 3120, 950, 1070, 4300, 3320, 1050, 4400, 3520, 1250, 4500, 3720, 4110, 4115, 4120, 4210, 4310, 4410, 4510 & OTHER MODELS USING CAT 1 THREE POINT HITCH - STANDARD, RED --- CATEGORY 1 --- 1" X 2-1/2" X 26" --- 7/8" PIN SIZE - AC 234854 --- COCKSHUTT T11424 --- MF 677240, 180485M1 --- FORD 251006F --- IH 370799R2, 751764R1 --- MM 10A12563 --- OLIVER 1E792 -- JD T21679 --- MH 180485M1

JDS246L: 3 POINT LOWER LIFT ARM: Fits John Deere Models-520, 530, 620, 630, 720, 730 - LEFT HAND --- NEW & IMPROVED --- CORRECT ANGLE ON IMPLEMENT END & REBUILDABLE DRAFT LINK LOCK - JD: AF2714R & AF2716R

JDS246R: 3 POINT LOWER LIFT ARM: Fits John Deere Models-520, 530, 620, 630, 720, 730 - RIGHT HAND --- NEW & IMPROVED --- CORRECT ANGLE ON IMPLEMENT END & REBUILDABLE DRAFT LINK LOCK - JD: AF2715R & AF2716R

JDS680: 3 POINT RETURN SPRING: Fits John Deere Models-520, 530, 620, 630, 720, 720D, 730, 730D - GREEN PAINT, 24 COILS, 1/4" SPRING DIAMETER, 15-1/4" LONG --- USA MADE - F2897R

JDS682: 3 POINT RETURN SPRING: Fits John Deere Models-420I, 420W, 430W, 435 - GREEN PAINT, 32 COILS, 1/4" SPRING DIAMETER, 2" O.D. x 12" LONG --- USA MADE --- FITS LEFT OR RIGHT - M3168T

JDS684: 3 POINT RETURN SPRING: Fits John Deere Models-40S (SN 69582 & UP), 40U (UP TO SN 62733); LH SIDE - 320S, 330S, 420S, 430S - GREEN PAINT, 48 COILS, 1/4" SPRING DIAMETER, 17-3/8" LONG --- USA MADE - M2421T

JDS686: 3 POINT RETURN SPRING: Fits John Deere Models-40S (UP TO SN 69581), 40H, 40T, 40V,40 W, 420H, 420T, 420V, 430H, 430T, 430V - GREEN PAINT, 28 COILS, 9/32" SPRING DIAMETER, 2" O.D. x 11 LONG --- USA MADE - M2118T

JDS688: 3 POINT RETURN SPRING: Fits John Deere Models-40U (SN 62734 & UP), 320U, 330U, 420U, 730U; RH SIDE ON TRACTORS W/ DUAL TOUCH-O-MATIC: 320S, 330S, 420S, 430S - GREEN PAINT, 28 COILS, 9/16" SPRING DIAMETER, 2 3/8" O.D. x 11 3/4" LONG --- USA MADE - M2593T

ACS139: 3 POSITION LIGHT SWITCH: Fits John Deere Models-A, AO, AR, B, BO, BR, D, G, H, L, LA (ALL W/ CUT-OUT) - HI-LO-CHARGE --- SERVICEABLE --- .800 DIAMETER THREADED END - AC 208197 --- COCKSHUTT TO7524 --- JD AB2687R, AF687R, AL2857T, AF708R --- MH 851674M1, 850449M1, 15199A, 837078M91, --- VTA463 -- OLIVER H7345A

MIS119: 3 PT LYNCH PIN: Fits John Deere Models-JD MODELS - 3/8" DIA PIN --- 1-5/8" USEABLE LENGTH --- 1-5/8" DIA RING -

IHS584: 3-1/2" SEAT PIVOT SUPPORT ROD: Fits John Deere Models-A, B, G - EXACT COPY OF ORIGINAL --- INCLUDES 2 FLAT WASHERS, 2 RUBBER BUSHINGS AND 2 #5 BOLTS --- USA MADE - IH: 355753R1

JDS115: 3-PIECE BATTERY COVER SET: Fits John Deere Models-A (SN 477000 - 583999) - 17 GAUGE --- USA MADE - A2227R (TOP), AA1999R (RH), AA2000R (LH)

JDS631: 3-POSITION FUSED SWITCH: Fits John Deere Models-STYLED: A, AO, AR, AOS, AI, AN, AW, ANH, AWH, B, BN, BW, BNH, BWH, D, G, GM, GW, GN, GH, H, HN, HNH, HWH - 15 AMPS --- 4 TERMINAL --- INCLUDES BLACK PLASTIC KNOB --- ONLY FITS LISTED MODELS USING A VOLTAGE REGULATOR - CASE VT2108 --- JD AF687R, AB2687R

JDS659: 3-WAY FUEL VALVE: Fits John Deere Models-UNSTYLED AR (SN 250000 - 259999), UNSTYLED B (SN 11622 - 59999), UNSTYLED BR (SN 325000 & UP), G (SN 1000 - 12999) - BRASS - AB609R

JDS660: 3-WAY FUEL VALVE: Fits John Deere Models-A (SN 497590- 697756), AR (SN 260000 - 280849), B (SN 94494 - 305246), D (SN 148872 - 191777), H (SN 20650 & UP), G (SN 13000 - 59701) - BRASS - AB2805R

JDS661: 3-WAY FUEL VALVE: Fits John Deere Models-A (SN 410859 - 476999), B (SN 1000 - 11621), D (SN 30400 - 143799), GP - BRASS - AD680R

JDS853: 4 POSITION LIGHT SWITCH WITHOUT KNOB: Fits John Deere Models-GAS / LP / DSL: 1010, 1020, 1520, 2010, 2020 --- FOLLOWING GAS / LP ONLY: 3010, 3020 (UP TO SN 67999), 4010, 4020 (SN 65000 - 90999) --- COMBINES: 45 THRU 105 - 6 SPADE TERMINALS --- 1/2" DIAMETER THREADED END - AR28401

JDS856: 4 POSITION LIGHT SWITCH WITHOUT KNOB: Fits John Deere Models-DIESEL: 3010, 3020 (SN 67999-122999), 4010, 4020 (SN 65000 - 90000), 5010 (UP TO SN 004499), 8020 - 8 SPADE TERMINALS --- 1/2" DIAMETER THREADED END - AR28402

JDS859: 4 POSITION LIGHT SWITCH WITHOUT KNOB: Fits John Deere Models-DIESEL: 3010, 3020 (SN 67999 - 122999), 4010, 4020 (SN 65000 - 90999), 5010 (UP TO SN 004499), 8020 - 8 SPADE TERMINALS --- 1/2" DIAMETER THREADED END - AR28402

WHS022: 4.5" X 16" (6 LUG) FRONT WHEEL W/ 4 WHEEL WEIGHT HOLES: Fits John Deere Models-SERVICEABLE FOR: MI, MT (SN 10001 & UP), 40, 420, 430, 430S, 430T, 430U, 430V, 430W, 435, 440 (NOTE: THIS RIM IS 1/2" WIDER THAN ORIGINAL) - 6" CIRCLE WITH 4.62" PILOT 2500 LB CAPACITY FOR 5.50 x 6.00 x16" TIRES
TO DETERMINE BACKSPACING, LAY THE WHEEL FLAT ON THE GROUND WITH THE BACK OF WHEEL FACING UP. NEXT, LAY A STRAIGHTEDGE ACROSS WHEEL AND MEASURE THE DISTANCE FROM THE BACK SIDE OF MOUNTING SURFACE TO THE STRAIGHTEDGE. BACKSPACING = 4" - FORD 8N1015D

ABC388: 4-1/2" SMOOTH GLASS LENS WITH "GUIDE" NAME: Fits John Deere Models-STYLED A (WITH SHEET METAL DASH), AO, AR, B (WITH SHEET METAL DASH), BN, BNH, D (SN 143800 & UP), H, R, 50, 60, 70, 70D, 80, 520, 620, 720, 720D, 820, 530, 630, 730, 730, 830 - 4-1/2" --- W/ RAISED "GUIDE" LOGO & --- RAISED PART NUMBER --- SMOOTH OUTER SURFACE -

IHS352: 4-3/4" CURVED LENS WITH "GUIDE" NAME: Fits John Deere Models-STYLED A WITH SHEET METAL DASH, AO, AR, B WITH SHEET METAL DASH, BN, BNH, D (SN 143800 & UP), H, R, 50, 60, 70, 70D, 80, 520, 620, 720, 720D, 820, 530, 630, 730, 730, 830 - HAS GUIDE NAME --- INTERCHANGEABLE WITH THE ORIGINAL --- DIMPLED OUTER SURFACE - JD: A2731R --- IH: 53521D, 350478R1

JDS418: 4-PIECE UMBRELLA BRACKET: Fits John Deere Models-A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 840 - W/ BOX SEAT TYPE 1949 & UP --- USA MADE - JD A3485R & F518A

JDS848: 5 POSITION LIGHT SWITCH LESS KNOB: Fits John Deere Models-GAS / DSL: 830 (3 CYL), 920, 1040, 1140, 1530, 1640, 1830, 2030, 2040, 2040S, 2240, 2440, 2630, 2640, 2840, 3030 (SN 162948 & UP), 3130 (SN 162948 & UP); 300B IND & FOLLOWING WITHOUT SOUND GARD CAB: 2150, 2155, 2255, 2355, 2550, 2555, 2755, 2855, 2940, 2950 - 5 SPADE TERMINALS --- 1/2" DIAMETER THREADED END - AR66478

ABC358: 6 VOLT BULB: Fits John Deere Models-EARLY A (SN 477000 - 500011), EARLY B (SN 60000 - 95999), D (SN 35310 - 143799) - DOUBLE CONTACT --- WILL FIT O.E.M. 5-3/4" 6-VOLT & 12-VOLT HEADLAMPS. -

JDS466: 6 VOLT COMBINATION TAIL LAMP ASSEMBLY: Fits John Deere Models-40, 320, 330, 420, 430 - 6 VOLT --- 4.5" DIAMETER --- WITHOUT SWITCH --- MUST HAVE SWITCH ON DASH - AT10569

JDS603: 6 VOLT COMPLETE HEADLIGHT ASSEMBLY: Fits John Deere Models-STYLED A (WITH SHEET METAL DASH), AO, AR, B (WITH SHEET METAL DASH), BN, BNH, D (SN 143800 & UP), H, R, 50, 60, 70, 70D, 80, 520, 620, 720, 720D, 820, 530, 630, 730, 730D, 830 - HAS CORRECT STUD LENGTH OF 1-3/16" --- 4-1/2" DIAMETER CURVED LENS --- CAN BE INSTALLED ON FRONT OR REAR --- BLACK, BULLET STYLE --- USA MADE - AC: 208233, 237100 --- COCKSHUTT: TO7720, TO19437, TO19438.

JDS648V6: 6 VOLT DASH LIGHT ASSEMBLY: Fits John Deere Models-40, 50 (SN 5016123 & UP), 60 ORCHARD / STANDARD (SN 6000001 & UP), 60 ROW CROP (SN 6028350 & UP), 70 (SN 706328 & UP), 320, 330, 420, 430, 435, 440 --- LOWER DASH LAMP FOR: 530, 630, 730, 730D - INCLUDES 6 VOLT BULB - JD AM1879T & AR20432R

ABC011: 6 VOLT DISTRIBUTOR COIL: Fits John Deere Models-JOHN DEERE MODELS - METAL HOUSING & MOUNTING BRACKET INCLUDED - COCKSHUTT T-17748 --- DELCO 1115380 & 1115381 --- WHITE 30-3014967 --- JD AM373T

ABC015: 6 VOLT GENERATOR CUT OUT ASSEMBLY: Fits John Deere Models-EARLY A, AO, AR, B, BO, BR, D, G, H, L, LA, LI - 15 AMP --- FOR AUTOLITE DISTRIBUTOR --- MOUNTING TABS ARE PARALLEL WITH CUT OUT - 1867781, C4012(9-1), 9-4, 9-5, CB4014, 1116809DR, R40061, 1500199M91

JDS319V6: 6 VOLT HEADLIGHT ASSEMBLY: Fits John Deere Models-HEADLIGHT ON THE FOLLOWING MODELS: 520, 530, 620, 630, 720, 720D, 730, 730D --- REAR WORKLIGHT ON THE FOLLOWING MODELS: A, B, G, R - 4-1/2" --- AS HEADLIGHT, INSTALLS ON FLAT TOP FENDERS --- AS REAR WORKLIGHT, BACK POST INSTALLS ON BACK OF BATTERY BOX - JD AB3549R

OLS068: 6 VOLT HEADLIGHT BULB WITH RING: Fits John Deere Models-EARLY A (SN 477000 - 500011), EARLY B (SN 60000 - 95999), D (SN 35310 - 143799) - SINGLE CONTACT --- 6 VOLT --- THESE BULBS FIT OEM LIGHTS ONLY. - 1323

IHS473: 6 VOLT REAR COMBO LIGHT ASSEMBLY: Fits John Deere Models-A (SN 477000 - 583999), AR (SN 272000 & UP), AO (SN 272000 & UP), B (SN 96000 - 200999), D (SN 186752 & UP), G (SN 13000 - 25999), H (SN 27000 & UP) - 4-1/2" --- 6 VOLT REAR COMBO LIGHT ASSEMBLY WITH RED JEWEL LENS & ROTARY SWITCH - COCKSHUTT: TO12302 --- JD: AA4618R --- CASE: VTA3396

IHS460: 6 VOLT SERVICEABLE FLATBACK HEADLIGHT: Fits John Deere Models-M, MT, MC, MI, 40, 320, 330, 420, 430, 440, 1010, 1010C (UP TO SN 15782) - 4 - 5/8" --- THIS LIGHT IS BULB STYLE, NOT SEALED BEAM LIKE ORIGINAL. - JD: AM706T, AM3100R --- IH: 357884R94

ABC418: 63 AMP ALTERNATOR W/ PULLEY: Fits John Deere Models-JD MODELS - 10 SQUARE INCH HOUSING SURFACE AREA --- 6 1/4" HOUSING DIAMETER, 2 1/2" PULLEY DIAMETER, 5/8" BELT WIDTH
NEW, NOT REBUILT --- CONVERTS 6V TO 12V --- SIMPLE 1-WIRE ALTERNATOR HOOK UP: RUN A WIRE FROM ALTERNATOR THROUGH AMP GAUGE TO POSITIVE SIDE OF BATTERY --- MUST REV ENGINE TO 800 - 850 RPM IN ORDER FOR UNIT TO SELF-EXCITE -- FOR 12 VOLT NEGATIVE GROUND SYSTEMS -

IHS354: 6V LIGHT BULB: Fits John Deere Models-STYLED A (WITH SHEET METAL DASH), AO, AR, B (WITH SHEET METAL DASH), BN, BNH, D (SN 143800 & UP), H, R, 50, 60, 70, 70D, 80, 520, 620, 720, 720D, 820, 530, 630, 730, 730D, 830 - 6 VOLT --- INTERCHANGEABLE WITH ORIGINAL --- FITS AS A HEADLIGHT OR A REAR COMBO LIGHT BULB - IH: 142309

JDS495: 6-VOLT DASH LIGHT W/ BULB: Fits John Deere Models-B, BR W/ELECTRIC START, STYLED D, AR, R, 80, 820 (UP TO SN 829999), 70 HICROP (UP TO SN 706327) - USA MADE --- 5/8" DIAMETER THREAD - MH: 762269M91

ABC152: 6-VOLT EXTERNAL VOLTAGE REGULATOR: Fits John Deere Models-40, 320, 330, 420, 430, 440 --- WILL ALSO FIT M, MC, MI, MT WHEN SWITCHING FROM A CUTOUT YOU ALSO MUST USE ABC188 - BASE FLAT MOUNT --- 4-TERMINAL - AC 228365 --- JD AM2702T, AM1863T, & REGULATOR 1118291, 1118308 & 1118780 --- MF 180142M92 --- DELCO 1119575 --- 1116807 & 1116816 --- IH354234R91, 121578C1

ABC336: 6-VOLT HEADLIGHT ASSEMBLY W/ --- 7" FLAT LENS: Fits John Deere Models-EARLY A (SN 477000 - 500011), EARLY B (SN 60000 - 95999), D (SN 35310 - 143799) - POWDER COATED BLACK - JD AB3144R --- CASE VT2615

JDS580: 6-VOLT HI SEALED-BEAM HEADLIGHT ASSEMBLY: Fits John Deere Models-520, 530, 620, 630, 720, 720D, 730, 730D - 4-1/2" DIAMETER --- ALSO A TAIL LIGHT 1949 & UP -

JDS579: 6-VOLT LO SEALED-BEAM HEADLIGHT ASSEMBLY: Fits John Deere Models-520, 530, 620, 630, 720, 720D, 730, 730D - 4-1/2" DIAMETER --- ALSO A TAIL LIGHT 1949 & UP -

ABC153: 6-VOLT VOLTAGE REGULATOR: Fits John Deere Models-A, AO, AR, B, BO, BR, D, H, G, L & LA - SADDLE MOUNT, 4-TERMINAL --- CAN REPLACE TRACTORS W/ CUT-OUTS BY USING STP #ABC188 VOLTAGE REGULATOR CONVERSION KIT - 10A20736 --- REPLACES DELCO CUT OUTS WHEN USING ABC188 1116766 & 1116809 --- REPLACES REGULATOR 1118265, 1118305, 1118786, 1118790

ABC347: 7" HEADLIGHT CORK GASKET: Fits John Deere Models-EARLY A (SN 477000 - 500011), EARLY B (SN 60000 - 95999), D (SN 35310 - 143799) - -

ABC307: 7" HEADLIGHT FLAT LENS: Fits John Deere Models-EARLY A (SN 477000 - 500011), EARLY B (SN 60000 - 95999), D (SN 35310 - 143799) - 7" -

ABC312: 7" HEADLIGHT RING: Fits John Deere Models-EARLY A (SN 477000 - 500011), EARLY B (SN 60000 - 95999), D (SN 35310 - 143799) - 7" -

JDS405: 800/801 INTEGRAL HITCH PARTS: Fits John Deere Models-JD MODELS - PIN --- USA MADE - 31583A

JDS914: ADJUSTABLE LOAD NEEDLE ASSEMBLY FOR ZENITH CARBURETORS: Fits John Deere Models-3010, 3020, 4000, 4010, 4020, ALL MODELS LISTED WITH 69 SERIES ZENITH CARB AND SIDE MOUNTED SOLENOID OR LOAD NOZZLE - 2.417 OVERALL LENGTH --- MADE IN THE USA -

JDS912: ADJUSTABLE LOAD NOZZLE ASSEMBLY FOR ZENITH CARBURETORS WITH END MOUNTED LOAD NOZZLE OR SOLENOID: Fits John Deere Models-3010, 3020, 4000, 4010, 4020, ALL MODELS LISTED WITH 69 SERIES ZENITH CARBURETORS AND END MOUNTED SOLENOID OR LOAD NOZZLE - 1.965 OVERALL LENGTH --- MADE IN THE USA --- USED TO ELMINATE THE ELECTRONIC SOLENOID - AH46109, R13069 (PACKING), R13070, H21058 (WASHER)

JDS571: ADJUSTABLE UPRIGHT CRANK HANDLE W/ ROLL PIN: Fits John Deere Models-40, 320, 330, 420, 430, 435, 440, 1010, 3010, 3020 - HANDLE ONLY (INCLUDES ROLL PIN) - M2438T

JDS569: ADJUSTABLE UPRIGHT LOCK: Fits John Deere Models-420, 430 - LOCK ONLY. --- NOT FOR UTILITIES. --- THERE ARE DIFFERENT LOCKS - MAKE SURE THIS IS THE ONE YOU NEED - M2735T

JDS529: AIR CLEANER BRACKET TUBE: Fits John Deere Models-520, 530 - CUT OFF TUBE --- USA MADE - JD B3698R

JDS530: AIR CLEANER BRACKET TUBE: Fits John Deere Models-620, 630 - CUT-OFF TUBE --- USA MADE - JD AA6758R

JDS516: AIR CLEANER CAP: Fits John Deere Models-M, MC, MT, 40, 320, 330, 420, 430, 440 (UP TO SN 448000), 1010 - 1.950" OD PIPE - JD AM371T SUBS FOR AM467T

FDS081: AIR CLEANER CLAMP: Fits John Deere Models-H - ALL W/ DONALDSON AIR CLEANER - AC 228480 --- FORD 311508 --- IH 66357DA --- JD AH774R --- MH 15790A --- MF 15203A --- OLIVER 1B6058A --- CASE G45011 -- MM 10P831

JDS540: AIR CLEANER INNER OIL CUP: Fits John Deere Models-M, MC, MT, 40, 320, 330, 420, 430, 1010 GAS (SN 246944 & UP) - 5-3/8" I.D. - JD AM468T & AM465T --- COCKSHUTT T7032 --- IH 52864DA, 362974R91, 375550R91, 378333R1 --- MH 1001012M91 --- MF 1754014M1 --- MM 10P931, 10P1146

JDS480: AIR CLEANER INTAKE STACK: Fits John Deere Models-UNSTYLED A (SN 410000 - 476999) - 35" TALL OVERALL; 24" TALL CAP TO 4 HOLE MOUNTING FLANGE --- USA MADE - AA362R

JDS482: AIR CLEANER INTAKE STACK: Fits John Deere Models-UNSTYLED B (SN 1000 - 59999) - 22" TALL - 3 HOLE MOUNTING FLANGE --- USA MADE - AB239R

JDS484: AIR CLEANER INTAKE STACK: Fits John Deere Models-UNSTYLED G (UP TO SN G12999) - 24" TALL - 4 HOLE MOUNTING FLANGE --- USA MADE - AA931R

FDS034: AIR CLEANER OIL CUP: Fits John Deere Models-B (SN 60000 & UP), BR (SN 329302 & UP), BO (SN 329302 & UP), H, 50, 520, 530 - 4-3/4" O.D. AT LIP 3" HEIGHT --- 4.450 I.D. --- FOR CLAMP HELD CUP --- MEASURE BEFORE ORDERING - AC 228478 --- FORD 311507 --- IH 352597R91 --- JD AR773R, AB1626R, AB3477R --- CASE G46012 --- MH 15791A --- 15793A, 180201A, 1751275M1 --- MM 10P829 --- OLIVER 1M6054

JDS541: AIR CLEANER OIL CUP CLAMP: Fits John Deere Models-B, BN, BNH, M, MC, MI, MT, 40, 320, 330, 420, 430, 50, 520, 530, 1010, 2010; ALSO FITS THE FOLLOWING FOR PONY MOTOR AIR CLEANER 720, 730, 80, 820, 830 - - JD AB1629R & AM466T --- MF GH2625 --- COCKSHUTT TO7033 --- IH 52865D --- MM 10P258

JDS753: AIR CLEANER PIPE GROMMET: Fits John Deere Models-820, 830, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3150, 4000, 4020 (DSL ONLY, NO GAS), 4030, 4230, 4040, 4050 (UP TO SN 5510), 4240 --- JD 210C CRAWLER - - R57119 --- AR56061, AR56275, R28799, R50082

JDS329: AIR CLEANER STACK: Fits John Deere Models-STYLED G, 620, 630, 720D, 730, 730D - USA MADE - AF656R & AR20668R

JDS428: AIR CLEANER STACK: Fits John Deere Models-R, 80, 820, 830, 830 - USA MADE - JD AR319R

JDS534: AIR CLEANER STACK: Fits John Deere Models-STYLED B - POWDER-COAT JD GREEN W/ SUPERIOR QUALITY DENT - JD AB1463R