Product Data Minneapolis Moline

This information is presented by Steiner Tractor Parts, Inc.  We are pleased to offer the following products for Minneapolis Moline tractors.  Digital Catalog Available Here!
Steiner Tractor Parts, Inc. is the premier supplier of restoration quality parts for antique tractors.  Check out our company blog for more information on our company and to view pictures we’ve taken of tractor shows and trips.  You can also view the Minneapolis Moline Products on our website.  We strive to provide top quality parts and superb customer service.  Give us a chance to supply the restoration parts you need for your old iron, we’d be glad to help!

FDS033: AIR CLEANER INNER OIL CUP: Fits Minneapolis Moline Models-335 GAS - - FORD 311506 --- MF 1751473M1 --- CASE G46013 --- MM 10P830

ABC347: 7" HEADLIGHT CORK GASKET: Fits Minneapolis Moline Models-MM MODELS - -

ABC495: ALTERNATOR PULLEY ONLY: Fits Minneapolis Moline Models-MM MODELS - -

ABC520: DELCO ROTOR BUTTON: Fits Minneapolis Moline Models-FOLLOWING DELCO WITH CLIP HELD CAP: BG, GB, GUI, GTA, GTB, GTC, R, RT, RTE, RTN, RTS, RTU, U, UT, UTC, UTS, UTU, UTN, UTE, UB, UB SPECIAL, UBE, UBG, UBU, UBN, Z, ZTN, ZTS, ZTU, ZAE, ZAN, ZAS, ZAU, ZBE, ZBU, ZM, ZBN, 335, 445, 4 STAR, 5 STAR - - JD-IH-CASE 1905590, MF 1750498M1, AC SERVICEABLE FOR 70225736, AC 1921285, COCKSHUTT-OLIVER 609119A, MM 10P2989

AVS001GK: GASKET SET --- W/ CARB GASKET: Fits Minneapolis Moline Models-V - - VT152, VT488

IHS474: RED JEWEL LENS --- RED DOT: Fits Minneapolis Moline Models-GB, GTB, GVI, 3 STAR, JET STAR, 4 STAR, 5 STAR, 335, M5, M602, U, Z, G1355, G1365 - - JD: A4925R

IHS772: HYDRAULIC POSITION CONTROL KNOB: Fits Minneapolis Moline Models-SERVICEABLE FOR: M670, 670 SUPER, 900, JETSTAR 3, JETSTAR 3 SUPER, U302, U302 SUPER, M5, 504, JETSTAR, 4 STAR, 4 STAR SUPER, G1050, G1350, 335, 445, M602, M604, G-1000 - - IH: 382801R1 --- MM: 10A7714

JDS541: AIR CLEANER OIL CUP CLAMP: Fits Minneapolis Moline Models-ZA, ZAU, ZAS, ZAN, ZAE, ZBE, ZBN, ZBU, JETSTAR, JETSTAR 3, JETSTAR 3 SUPER, 3 STAR, 4 STAR, 445 - - JD AB1629R & AM466T --- MF GH2625 --- COCKSHUTT TO7033 --- IH 52865D --- MM 10P258

MMS001GK: GASKET SET (W / CARB GASKET): Fits Minneapolis Moline Models-U, UB, UTS GAS, G, U DELUXE, 5 STAR, M5, 602, 604, 670, SUPER 670 - -

MMS002: HEAT RISER VALVE ONLY: Fits Minneapolis Moline Models-U, UB, UTS GAS, G - - KE823

MMS009: MANIFOLD, 1-PC INTAKE & EXHAUST: Fits Minneapolis Moline Models-LATE U, UB, 5 STAR, M5, 602, 604, M670, SUPER M670 ALL WITH GAS ENGINES - - 10A9465

MMS010: MANIFOLD, EXHAUST w/ ELBOW & PLATES: Fits Minneapolis Moline Models-JET STAR, JET STAR 2, JET STAR 3, BIG MO 500, 4 STAR, U302, 335, 445 W/ 206 & 220 C.I. - - 10A7695 (MANIF) --- 10A9363 (ELBOW) --- 10A7931 (PLATE)

MMS010GK: GASKET SET ONLY: Fits Minneapolis Moline Models-JET STAR, JET STAR 2, JET STAR 3, BIG MO 500, 4 STAR, U302, 335, 445 W/ 206 & 220 C.I. - -

MMS011: ELBOW ONLY: Fits Minneapolis Moline Models-JET STAR, JET STAR 2, JET STAR 3, BIG MO 500, 4 STAR, U302, 335, 445 W/ 206 & 220 C.I. - - 10A9363

MMS016: MANIFOLD EXHAUST: Fits Minneapolis Moline Models-U DELUXE (UDLX) - - KE821D

MMS024: Instruction Plate, ign/light switch: Fits Minneapolis Moline Models-MM U, 335, 445, Jetstar series, 5 Star, GVI, 4 Start, 4 Star Super, Big Mo 400, M5, M504, Big Mo 500, Big Mo 600, G705, G706, M602, M604, M670 - -

MMS026: SHIFT LEVER RUBBER BOOT: Fits Minneapolis Moline Models-3 STAR, JET STAR 3, M670, G900, G1000, G1000 VISTA, G1050, G1350, A4T - - 10A19825

MMS030: STEERING WHEEL MEDALLION WITH O-RING: Fits Minneapolis Moline Models-335, 445, 4 STAR, 4 STAR SUPER, JET STAR, 5 STAR, M5, M504, M602, M604, G705, G706, GVI, G707, G708, JETSTAR 3, G1000, G1050, G1350, G1355, U302, JETSTAR 3 SUPER, M670 - - 10A15590, 10A14434, 10A22902 (MEDALLION), 10A14477 (O-RING), --- 20-0007864, 20-0007928

OLS018GK: GASKET SET ONLY: Fits Minneapolis Moline Models-BG W / HERCULES 133 C.I. ENGINE - - 113080, 112232

OLS129: FUEL GAUGE, 12 VOLT NEGATIVE GROUND: Fits Minneapolis Moline Models-G750 - - 155558A

OLS140: 4-POSITION COMBINATION LIGHT SWITCH: Fits Minneapolis Moline Models-G750, G850, G955, G1355 - - - 105371A, 30-33D 4868 - 30-3365891 - 168089A MM# 168089A, 30-3365891

REP072: TRACTOR SERIAL NUMBERS (1940-1975): Fits Minneapolis Moline Models-MM MODELS - -

WHS058: REAR INNER TUBE 11.2 X 28, 12.4 X 28: Fits Minneapolis Moline Models-MINNEAPOLIS MOLINE MODELS - -

WHS059: REAR INNER TUBE 11.2 X 24, 12.4 X 24: Fits Minneapolis Moline Models-MINNEAPOLIS MOLINE MODELS - -

WHS060: REAR INNER TUBE 7.50 X 24, 8.3 X 24, 9.5 X 24: Fits Minneapolis Moline Models-MINNEAPOLIS MOLINE MODELS - -

WHS061: REAR INNER TUBE 13.6 X 28, 14.9 X 28: Fits Minneapolis Moline Models-MINNEAPOLIS MOLINE MODELS - -

WHS062: REAR INNER TUBE 9.5 X 32: Fits Minneapolis Moline Models-MINNEAPOLIS MOLINE MODELS - -

WHS063: REAR INNER TUBE 11.2 X 34, 12.4 X 34, 11.2 X 36, 12.4 X 36: Fits Minneapolis Moline Models-MINNEAPOLIS MODELS - -

WHS064: REAR INNER TUBE 11.2 X 38, 12.4 X 38: Fits Minneapolis Moline Models-MINNEAPOLIS MOLINE MODELS - -

WHS065: REAR INNER TUBE 13.6 X 38, 14.9 X 38: Fits Minneapolis Moline Models-MINNEAPOLIS MOLINE MODELS - -

ABC367: KNOB: Fits Minneapolis Moline Models-UTA - 3SCREW TYPE TERMINALS --- PLAIN FACE, BLACK --- MADE IN THE USA - AB2687R, AF687R, AL2857T

WHS054: TIRE - 5.00 X 15, 4 PLY: Fits Minneapolis Moline Models-MM MODELS - 5.00 X 15, 4 PLY --- SAYS "OLD STYLE" RIGHT IN THE TIRE --- HAS THE OLD STYLE TREAD AND IT IS A TRIPLE RIB TREAD -

WHS055: TIRE - 6.00 X 16, 4 PLY: Fits Minneapolis Moline Models-MM MODELS - 6.00 X 16, 4 PLY --- SAYS "OLD STYLE" RIGHT IN THE TIRE --- HAS THE OLD STYLE TREAD AND IT IS A TRIPLE RIB TREAD -

JDS500: OIL FILL BREATHER CAP W/CLIP: Fits Minneapolis Moline Models-MM MODELS - 1 1/2" TALL --- WITH CLIP --- "OIL" STAMPED INTO TOP --- INCLUDES COPPER FILTER ELEMENT --- E-COATED BLACK --- USA MADE --- LIKE ORIGINAL (ON JD SERIES, MAY DIFFER ON OTHERS, BUT WILL BE FUNCTIONAL) - AC 207552, 204656 --- CASE VT3545, A36608 --- FORD 8N6766B --- JD AM1586T, AM494T, AM1578T, M2988T --- IH49049DX, 364901R91, 364899R91, 49049DX, 364901R91, 364899R91, JD 364901R1

MIS118: PTO OVER RUNNING CLUTCH: Fits Minneapolis Moline Models-MM MODELS - 1 1/8" -- 6 X 1 3/8" --- 6 SPLINE --- TRACTORS UP TO 75 HORSEPOWER -

MIS138: PTO OVER RUNNING CLUTCH: Fits Minneapolis Moline Models-MM MODELS - 1 3/8" -- 6 X 1 3/8" --- 6 SPLINE --- TRACTORS UP TO 75 HORSEPOWER -

ABC489: MAGNETO PUSH-PULL IGNITION SWITCH: Fits Minneapolis Moline Models-MM MODELS - 1 SCREW TYPE TERMINAL --- IN = OFF --- OUT = ON --- FITS MOST MODELS WITH A MAGNETO IGNTION --- NOT ORIGINAL, BUT WORKS GREAT! -

JDS588: DASH LIGHT COVER: Fits Minneapolis Moline Models-MM MODELS - 1" DIAMETER --- BLACK -

JDS588CH: DASH LIGHT COVER: Fits Minneapolis Moline Models-MM MODELS - 1" DIAMETER --- CHROME -

ABC221: PTO KNOB OR GEAR SHIFT KNOB: Fits Minneapolis Moline Models-R, Z, U (THROTTLE, HYDRAULIC, TRANS, BELT PULLEY, STARTER ETC KNOB) - 1.485" O.D ABOVE BAND --- 1.336" TALL --- 1.640" O.D BELOW BAND --- 3/8" NATIONAL FINE THREAD = .375" x 24 --- 0.750" = DEPTH - AC 206456 --- FORD C5NN7213A. --- MF 180006M91 --- OLIVER 702307A --- MM UT223A, 10A9151

ABC399: FRONT WHEEL LUG BOLT: Fits Minneapolis Moline Models-A, R, BF, 335, 445,JET STAR, JET STAR 3, JET STAR 4, 3 STAR, 4 STAR, 5 STAR, M400, GB, GTB, GVI, G1000, M5, M602, M670 - 1/2" -- 20 THREAD, 7/8" LONG THREAD 13/16" HEX HEAD --- SOLD INDIVIDUALLY --- SILVER IN COLOR - AC 207503 & 256906 --- CASE 04557AB --- COCKSHUTT FXS44 & T15804 --- IH: 351079R1 -- JD JD19R, JD22 & AL2329T --- MASSEY 16216A, GK4207 & 512581M1 --- MM 10A863 --- OLIVER K1669, 1K736

ABC229: SEDIMENT BOWL SCREEN: Fits Minneapolis Moline Models-335, 445, 4 STAR, JET STAR 3, 3 STAR, JET STAR 4, 5 STAR, M5, M602, M670, R, --- SERVICEABLE FOR: U SERIES, Z SERIES - 1/4" DIAMETER CENTER HOLE --- SOLD INDIVIDUALLY -- BRASS - IH 49923D

ABC534: SEDIMENT BOWL SCREEN: Fits Minneapolis Moline Models-335, JET STAR 3, 3 STAR, JET STAR 4, 5 STAR, M5, M602 & M670 - 1/4" DIAMETER CENTER HOLE --- SOLD INDIVIDUALLY -- PLASTIC - 49923D

ABC209: RADIATOR DRAIN PLUG: Fits Minneapolis Moline Models-VARIOUS MODELS - 1/4" NPT --- USA MADE - AC 912415, CASE 217-103, COOP/COCKSHUTT T5002,FORD 81465471, 9N8115B, C9NN8115A, JD M292T, IH 534184R1, MH 12692X, FERGUSON 763716M1, MF 1016199M1, OLIVER IKS517, MM 10A22845

ABC418: 63 AMP ALTERNATOR W/ PULLEY: Fits Minneapolis Moline Models-MM MODELS - 10 SQUARE INCH HOUSING SURFACE AREA --- 6 1/4" HOUSING DIAMETER, 2 1/2" PULLEY DIAMETER, 5/8" BELT WIDTH
NEW, NOT REBUILT --- CONVERTS 6V TO 12V --- SIMPLE 1-WIRE ALTERNATOR HOOK UP: RUN A WIRE FROM ALTERNATOR THROUGH AMP GAUGE TO POSITIVE SIDE OF BATTERY --- MUST REV ENGINE TO 800 - 850 RPM IN ORDER FOR UNIT TO SELF-EXCITE -- FOR 12 VOLT NEGATIVE GROUND SYSTEMS -

WHS002: REAR RIM 10 X 24: Fits Minneapolis Moline Models-335 INDUSTRIAL - 10 X 24 --- 4 LOOPS --- USA MADE --- 14-12" C-C LOOPS --- VALVE STEM HOLE IS ON SIDE CLOSEST TO THE LOOPS - IH 354876R91 --- MH 852191M1

WHS004: REAR RIM 10 X 28: Fits Minneapolis Moline Models-MM MODELS 335 & UP - 10 X 28 --- 6 LOOPS --- USA MADE -

OLS018: MANIFOLD INTAKE & EXHAUST: Fits Minneapolis Moline Models-BG W/ HERCULES 133 C.I. ENGINE - 10" CENTER TO CENTER OUTSIDE BOLT HOLES --- 15" OVERALL - OLIVER: 113315 --- AVERY: 113119

WHS035: REAR RIM: Fits Minneapolis Moline Models-MM MODELS - 10" x 38" --- DOUBLE-BEVEL -

ABC391: SERVICEABLE FRONT WHEEL WEIGHT: Fits Minneapolis Moline Models-MM 3 STAR, 4 STAR, 5 STAR, JET STAR 3, U302, 335, 445, M5, M602, M604, M670, G900, G950, G1000 - 10.5" C. C. BOLT HOLES --- ALL WITH 16" 6 LUG RIM W/ WHEEL WEIGHT HOLES IN RIM. VALVE STEM CUT-OUT MUST BE ALIGNED W/ BOLT MOUNTING HOLE TO FIT CERTAIN MODELS. --- SOLD INDIVIDUALLY --- NOTE: NOT ORIGINAL, BUT WORKS GREAT! -

ABC239: WATER TEMPERATURE GAUGE: Fits Minneapolis Moline Models-MM MODELS - 100 DEGREE - 280 DEGREE TEMPERATURE RANGE --- 90 DEGREE POINTER SWEEP --- 6 FT CAPILLARY TUBE --- LIGHTING & MOUNTING HARDWARE INCLUDED --- USA MADE --- MAY VARY FROM ORIGINAL APPEARANCE --- CHROME BEZEL - MH 761511M91

WHS012: REAR RIM 11" X 28": Fits Minneapolis Moline Models-335, 445, JETSTAR 3 & OTHER MM MODELS - 11" x 28" --- 6 LOOPS --- USA MADE -

CKS095: AIR CLEANER CAP: Fits Minneapolis Moline Models-BF - 1-13/16" I.D. - CASE VT3812

IHS436: LIGHT BULB --- 12 VOLT: Fits Minneapolis Moline Models-MM R SERIES, U SERIES, Z SERIES - 12 VOLT --- INTERCHANGEABLE WITH ORIGINAL --- FITS AS A HEADLIGHT OR A REAR COMBO LIGHT BULB -

ABC460: SEALED BEAM BULB (12 VOLT, HI BEAM): Fits Minneapolis Moline Models-335, JET STAR & UP - 12 VOLT HI BEAM - 4410

OLS130: TEMPERATURE GAUGE: Fits Minneapolis Moline Models-G750 - 12 VOLT NEGATIVE GROUND --- CHROME BEZEL - 155557A --- 30-3031659

ABC348: HOT COIL (55000 VOLTS): Fits Minneapolis Moline Models-MM MODELS - 12 VOLT SYSTEMS --- MAXIMUM VOLTAGE FOR FASTER STARTING, REDUCED PLUG FOULING & LONGER PLUG LIFE --- MUST USE WITH ABC366 EXTERNAL RESISTOR -

WHS013: REAR RIM 12" X 28": Fits Minneapolis Moline Models-335, 445, JETSTAR 3 & OTHER MM MODELS - 12" x 28" --- 6 LOOPS --- USA MADE -

WHS037: REAR RIM: Fits Minneapolis Moline Models-MM MODELS - 12" x 38" --- DOUBLE-BEVEL -

ABC353: SEALED BEAM LIGHT BULB: Fits Minneapolis Moline Models-MM MODELS - 12-VOLT --- 4.415" DIAMETER --- LO BEAM --- INTERCHANGEABLE WITH THE ORIGINAL - 4411

JDS499: DASH LIGHT W/ BULB: Fits Minneapolis Moline Models-MM MODELS (21/32" DIAMETER THREAD) - 12-VOLT --- 5/8" DIAMETER THREAD - JD AD2835R SUBS AD1855R, AD2082R, ADAD2834R, AR1563R, AR20447R, AR26757R, AR33479R, AR35993R, B1728R, RE13195R

WHS008: REAR SPINOUT RIM 13 X 28: Fits Minneapolis Moline Models-335, 445, JETSTAR 3 & OTHER MM MODELS - 13 X 28 --- 4 RAILS --- HOLES FOR STOP ADJUSTMENT ARE DRILLED 90 DEGREES --- PERPENDICULAR TO SIDE OF RIM NOT 90 DEGREES TO RAIL --- USA MADE - AC 237573

WHS024: REAR RIM 14" X 38": Fits Minneapolis Moline Models-MM MODELS - 14 X 38 --- DOUBLE BEVEL
18 DRIVE LUGS TOTAL -

MMS033: STEERING WHEEL: Fits Minneapolis Moline Models-JET STAR 3, JET STAR 3 SUPER, M670 SUPER, G900, G955, G1000, G1050, G1350, G1355, U302 - 15" DIAMETER - 10A23441

FDS346: TOP LINK, CATEGORY 2: Fits Minneapolis Moline Models-M602, M670, 5 STAR, M5, 3 STAR, JET STAR 3, JET STAR 4, G900, G1000, & OTHER MODELS USING CAT 2 THREE POINT HITCH - 16 3/4" CENTER BODY --- ADJUSTABLE W/ FORGED ENDS WITH 1" HOLE --- CATEGORY 2 -

FDS023: TOP LINK: Fits Minneapolis Moline Models-BG, 335, 445, 4 STAR & OTHER MODELS USING CAT 1 THREE POINT HITCH - 16" ADJUSTABLE WITH FORGED ENDS --- CATEGORY 1 --- HAS 3/4" HOLES --- WILL WORK ON MODELS LISTED, BUT HAS DIFFERENT APPEARANCE THAN ORIGINAL -

CKS066: STEERING WHEEL: Fits Minneapolis Moline Models-EARLY R IF 16" DIAMETER IS DESIRED - 16" DIAMETER, KEYED & TAPERED HUB,1" TO 7/8" SHAFT, 3 SPOKES - CASE A7668 & VT2230

IHS141: GENERATOR BELT: Fits Minneapolis Moline Models-Z SERIES, R SERIES - 17/32" X 34-1/8" --- ALL WITH DELCO GENERATOR - IH: 49341D --- MM: KE1112

ABC191: FAN / WATER PUMP BELT: Fits Minneapolis Moline Models-Z SERIES, R SERIES (FAN BELT) - 17/32" X 42-1/8" - FORD EAF8577A --- IH 366781R1 --- MM RE684

MMS028: STEERING WHEEL: Fits Minneapolis Moline Models-GVI, G705, G706, G707, G708, JET STAR 3, 4 STAR, 4 STAR SUPER, M5, M504, M602, M604, M670 - 17-3/4" DIAMETER WITH TAPERED AND KEYED SHAFT - MM 10A14456 --- MF 1015446M91

MMS015: STEERING WHEEL: Fits Minneapolis Moline Models-G, GB, GTA, GTB, R, RTI, U, UB, Z, ZB - 17-5/8" DIAMETER --- TAPERED & KEYED HUB --- 7/8" - 1" SHAFT --- 3 SPOKES --- ALL NEW MATERIAL, JUST LIKE ORIGINAL - JT341A --- 10A8502

ABC170: SPARK PLUG: Fits Minneapolis Moline Models-18 MM THREADS, GAS: MM 2 STAR, 4 STAR, 5 STAR, M5, U-302, 335, 445, G, U, G704, G705, M504, M602, M604, G900, G950, G1050, G1350 (PLUG GAP .30) MM JET STAR SERIES (PLUG GAP .25) - 18 MM THREAD DIAMETER --- 1/2" REACH --- 7/8" HEX --- MEDIUM HOT --- STD. TIP/RESISTOR --- PLUG GAP .025 - AUTOLITE 386 --- CHAMPION D10, K13, D14, M14, RD14, K15J, D16, D16J, RD16, UD16, D21, D89D

IHS394: AIR CLEANER CAP: Fits Minneapolis Moline Models-JETSTAR 3, 3 STAR, GTU, U, UB - 2 " I.D. --- 5-1/4" BODY DIAMETER --- FITS OUTSIDE OF PIPE - MM: 10A8040 --- MH: 763183M91 --- IH: 355935R91, 353019R92

MHS043: FUEL CAP: Fits Minneapolis Moline Models-ZA SERIES, ZB SERIES, SUPER 4 STAR, GVI, JET STAR, M5, M670, U302, GB, GT SERIES, 335, 445, JETSTAR 3, JETSTAR 4, 3 STAR, 5 STAR, M602 - 2 1/2" I.D., 1/4" HIGH --- UNPAINTED --- 2 - 7/8" O.D. --- VENTED, INCLUDES GASKET - AC 206622 --- CASE G13271, A32119 --- MM 10A7658 & 31-1596233, 10A3354, 10A23649, 10A7344 --- FORD C5NN9030B, E7NN9030AA --- JD AT20911, ATR28483, AF2914R --- MH 850493M1

ACS130: RUBBER GEAR SHIFT BOOT: Fits Minneapolis Moline Models-MM MODELS - 2 1/4" BOTTOM I.D. --- 7/16" HOLE DIAMETER - JD L31055

ABC527: CONCAVE LIGHT MOUNTING WASHER / RETAINER: Fits Minneapolis Moline Models-MM MODELS JET STAR & UP - 2 1/4" O.D. 9/16" CENTER HOLE - IH: 388947R1 --- JD: F2935R (?)

ACS010: 3 X 15 FRONT WHEEL, 5 HOLE: Fits Minneapolis Moline Models-BG - 2 3/4" PILOT, 2 5/8" BOLT CENTER TO CENTER - OLIVER: 450530A

MMS013: MANIFOLD INTAKE: Fits Minneapolis Moline Models-U, UB GAS - 2 BOLTS ATTACH EXHAUST TO INTAKE - KE822A

JDS229: STEERING WHEEL: Fits Minneapolis Moline Models-MANUAL STEERING ONLY: JETSTAR, JETSTAR 2, 335, 445, JETSTAR 3, JETSTAR 3 SUPER - 2 CYLINDER W/ 3 SPOKES --- 17-5/8" DIA., TAPERED & KEYED HUB, 3/4" - 7/8" SHAFT, 3 SPOKES --- ALL NEW MATERIAL, STEEL SPOKES, JUST LIKE ORIGINAL - AA380R, 10A7132

ABC405: BATTERY CABLE: Fits Minneapolis Moline Models-MM MODELS - 2 GAUGE, LENGTH =13" -- EYELET OPENING= 1/2" --- HEAVY DUTY, STRAIGHT TERMINALS --- GROUND CABLE, NON-INSULATED --- WHILE WE DEAL WITH A SUPPLY ISSUE, THIS MAY BE A 2 GAUGE CABLE. -

ABC366: UNIVERSAL 12 VOLT RESISTOR: Fits Minneapolis Moline Models-MM MODELS - 2 TERMINAL STYLE --- REDUCE VOLTAGE --- 1.125 TO 1.375 OHMS OF RESISTANCE. -

ABC327: MUFFLER CLAMP: Fits Minneapolis Moline Models-MM MODELS - 2" --- CHROME, ORIGINAL STYLE -

ABC123: SEDIMENT GLASS BOWL ONLY: Fits Minneapolis Moline Models-335, 445, 4 STAR, JET STAR 3, 3 STAR, JET STAR 4, 5 STAR, M5, M602, M670, R, --- SERVICEABLE FOR FOLLOWING: U SERIES, Z SERIES - 2" O.D. --- 1.280" L --- 3/8" PIPE INLET -- (2) 1/8" PIPE OUTLETS - AC 237945 --- JDM3340T --- IH 357958R1 --- MASSEY 1001514M1 --- FORD 9N9162 -- JD M3340T

ABC124: SEDIMENT GLASS BOWL ONLY: Fits Minneapolis Moline Models-ZB, ZAS, UB, UTS, GB - 2.370 LENGTH, 2-1/8" O.D. - AC 70237947 --- COCKSHUTT 12079G --- OLIVER 1JAS-841 -- MM 10A3809

ABC351: MUFFLER CLAMP: Fits Minneapolis Moline Models-MM MODELS - 2.5" --- ORIGINAL STYLE, CHROME -

ABC444: BONDED BRAKE DISC: Fits Minneapolis Moline Models-G955, G1355 - 21 SPLINE, 8" DIA, 2 3/4" SPLINE I.D - OLIVER 105724A, 30-3135241 --- MM 10572RA, 30-3135241

ACS263: RUBBER GEAR SHIFT BOOT: Fits Minneapolis Moline Models-MM BF, GB, GTB, GVI, R, U, Z, ZA, ZB, ZAS, G705, G706 - 2-1/16" BOTTOM I.D. --- 11/16" HOLE DIAMETER - AC 800354 --- MM B916A --- MF 1013213M1

ACS123: RED GLASS TAIL LIGHT LENS: Fits Minneapolis Moline Models-JET STAR, 4 STAR, 5 STAR, 445, BIG MO 400, BIG MO 500, BIG MO 600, 335 - 2-1/8" O.D., GLASS, RED - OLIVER 1K7380, JD A3686R, AC 223715, 70223715, MM 10P782, 1K7380 IH 354308R1

ABC410: CARBURETOR TO MANIFOLD MOUNTING GASKET: Fits Minneapolis Moline Models-MM MODELS - 2-15/16"C.C. BOLT HOLES --- 1-5/8" CENTER HOLE --- CHECK MEASUREMENTS BEFORE ORDERING -

ABC408: CARBURETOR TO MANIFOLD MOUNTING GASKET: Fits Minneapolis Moline Models-BG & MORE MODELS - 2-3/8" - 2-7/16" SLOTTED BOLT HOLES, 1-3/16" CENTER HOLE --- CHECK MEASUREMENTS BEFORE ORDERING - FORD 9N-9448 (2 PCS), 9N9447 (1 PC)

JDS679: RUBBER RING GROMMET: Fits Minneapolis Moline Models-G750, G850, G955, G1355 - 2-7/16" I.D., 3-3/4" O.D. --- FOR FUEL TANK FILLER NECK --- FITS AROUND FUEL INTAKE PIPE - MM 106619A, 72162460, 30-3209865 --- JD R1385R

ABC395: ELECTRICAL OUTLET SOCKET: Fits Minneapolis Moline Models-MM MODELS - 2-PIN TYPE - JDAM2049T

ACS178: OIL FILL BREATHER CAP WITHOUT CLIP: Fits Minneapolis Moline Models-MM MODELS - 3 1/4" TALL --- "OIL" STAMPED INTO TOP --- INCLUDES COPPER FILTER ELEMENT --- ECOATED BLACK --- USA MADE - AC 203196, AC 205298, AC 200267 --- CASE VT3545 & A36608

IHS406: OIL FILL BREATHER CAP WITH CLIP: Fits Minneapolis Moline Models-MM MODELS - 3 1/4" TALL --- "OIL" STAMPED INTO TOP --- INCLUDES COPPER FILTER ELEMENT --- E-COATED BLACK --- USA MADE --- EXACT COPY OF ORIGINAL --- CAN ALSO BE USED AS A ROCKER BREATERH CAP & CYLINDER HEAD BREATHER CAP FOR INTERNATIONAL. - AC: 203196, AC205298, AC200267 --- CASE: VT3545 & A36608 --- JD: AM669T, AM1586T, AM494T --- IH: 49049DX, 364901R91, 364899R91

ABC524: MINI 42 AMP 12 VOLT NEG. GROUND ALTERNATOR: Fits Minneapolis Moline Models-MODELS REQUIRING A SMALLER DIAMETER ALTERNATOR FOR CLEARANCE THAN OUR ABC418 - 3 INTERNAL REGULATOR WIRE WITH WIRING INSTRUCTIONS --- 2 1/2" DIAMTER PULLY 3/8" BELT WIDTH 4 1/2" DIAMETER HOUSING --- REQUIRES A DIODE OR IDIOT LIGHT TO ISOLATE THE SYSTEM -

ABC068: STARTER SOLENOID RELAY ASSEMBLY: Fits Minneapolis Moline Models-GTA, GTB, R SERIES, ZA, ZB, UB (ALL 6-VOLT) - 3 POST --- SADDLE MOUNT --- WORKS ON 6V AND 12V SYSTEMS - FORD 8N11450 --- JD 1119799 --- IH DR1465

ABC138: SOLENOID STARTER OR MANIFOLD HEATER SWITCH: Fits Minneapolis Moline Models-(M5 W/ PRESTOLITE), ZA, ZB, UB, UT, GVI, GB, GTC, G705, G706, G707, G708, G900, G950, G1000, G1350 USING STARTERS #A4T1600, #1107605, #1108109, #1108167, 1108983, #1113029, #1113020 - 3 POST --- SADDLE MOUNT --- WORKS ON 6V AND 12V SYSTEMS - AC: 237136 --- SUPERCEDES AC: 233296 --- OLIVER: 101059AS --- DELCO: DR1467, DR1465 --- MM: 101059AS --- 1114545

MMS023: 3 POSITION IGNITION SWITCH: Fits Minneapolis Moline Models-JET STAR 3 SUPER, M670 SUPER, G900, G1000, U302, U302 SUPER - 3 SCREW TYPE TERMINALS --- USA MADE --- W/ TWO KEYS - MXS204, --- MM 10A22293

MMS025: 5 Position Light & Ignition Switch w/ 2 Keys: Fits Minneapolis Moline Models-U, 445, 2 STAR, JET STAR 3, 5 STAR, GVI, 4 STAR, 4 STAR SUPER, JET STAR 4, BIG MO 400, M5, M504, BIG MO 500, BIG MO 600, G705, G706, M602, M604, M670 (GAS / LP, UP TO SN 29901891) & DSL (UP TO SN 30000819) - 3 SCREW TYPE TERMINALS PLUS RESISTOR SPADE --- USA MADE - 10A7473, 10A23929

FDS073: HYDRAULIC LIFT QUANDRANT LEVER FRICTION DISC: Fits Minneapolis Moline Models-G955, G1355 - 3" O.D., 7/16" CENTER HOLE - MH: 764570M1 --- MM: E887 --- OLIVER: E887 --- MF: 180889M1 --- IH: 3044397R1